Shifting becoming a concern

Mustang Forums Mustang Classifieds Photo Gallery Calendars Search Live Chat Contact MF Sponsors
Mustang Recalls Mustang TSB's News Timeslips Timeline Wallpaper Member List Register Login

Shifting becoming a concern

Printable Version

Mustang >> Ford Mustang Tech >> General Tech >> Shifting becoming a concern

Page: [1]

Mustang Forums Sponsor

General Tech Forum Sponsored by Edelbrock

Login
Message << Older Topic Newer Topic >>

Shifting becoming a concern - 5/5/2008 7:40:17 PM

94gtbuilder

Posts: 130
Joined: 1/24/2008
Status: offline I am having an incredibly difficult time shifting as of late in my stang. I read a few similar posts about the situation and have come to a few conclusions as to what the problem may be. The guy who had it before me put a high friction clutch in it, and i believe it's warped the quadrant or something, and has the clutch all out of adjustment. Does this seem plausible? If so, steeda makes this clutch adjuster kit (http://www.steeda.com/products/clutch_adjuster_kits.php). Would this solve my problem? I'm pretty sure the shifter is stock as well as the cable and my car has almost 200,000 miles. I also read something about a TO bearing which I'm not familiar with. I really dont want to destroy my transmission. I plan on getting a tri-ax soon, would that have a new TO bearing? I really dont know much about transmissions. Thanks for the help.

_____________________________

http://www.theautolog.com/94gt-1

Post #: 1

RE: Shifting becoming a concern - 5/5/2008 10:37:41 PM

P.S.I.cho

Posts: 817
Joined: 3/10/2005
Status: offline
what exactly is it doing, is the clutch feeling stiffer, is it grabbing at a different pedal height or is it grinding while you try to shift? at 200k miles if the transmission hasnt been rebuilt yet this would the that mark where the synchros inside the trans are starting to go out, if this is the case it will grind while shifting gears, and if this is happening best to get it rebuilt ASAP and save money the longer u wait the more expensive the rebuild will be as more parts will fail with metal debris in the transmission

_____________________________

95 gt vert
331 stroker
d-1sc @ 10 lbs
582 rwhp 511 ft. Tq
too much to list
http://www.cardomain.com/ride/2364369/1
my videos
http://videos.streetfire.net/uploaded/vertstang95.htm

(in reply to 94gtbuilder)

Post #: 2

RE: Shifting becoming a concern - 5/5/2008 10:49:51 PM

94gtbuilder

Posts: 130
Joined: 1/24/2008
Status: offline I kinda doubt it's the original tranny but i dont know. All i know is it's really hard to shift into gear. I dont seem to be having much trouble with the clutch itself, but I really dont know??? The car doesnt even have to be moving for this problem to occur. It even happens when I go from neutral to 1st. It just doesnt want to engage!

_____________________________

http://www.theautolog.com/94gt-1

(in reply to P.S.I.cho)

Post #: 3

RE: Shifting becoming a concern - 5/6/2008 9:48:26 AM

Jfsram

Posts: 821
Joined: 1/29/2007
Status: offline Sounds like the clutch is not disengaging completely. So the disc is spinning and you are forcing your synchronizer to stop the disc. Hence the high resistance on your shifter.

Sometimes the same will occur if the pilot bearing/bushing is frozen to the input shaft.

Can you upshift ok. Or will it easily slip into gear with the engine off?

_____________________________

65 Belevedere
69 Super Bee
87 Ram
93 Mustang
94 LHS

http://www.cardomain.com/ride/754650

(in reply to 94gtbuilder)

Post #: 4

RE: Shifting becoming a concern - 5/6/2008 9:58:49 AM

94gtbuilder

Posts: 130
Joined: 1/24/2008
Status: offline It seems to go into gear ok with the engine off. How difficult is it to change the syncros? or the pilot bearing?

_____________________________

http://www.theautolog.com/94gt-1

(in reply to Jfsram)

Post #: 5

RE: Shifting becoming a concern - 5/6/2008 6:24:08 PM

94gtbuilder

Posts: 130
Joined: 1/24/2008
Status: offline OK went out and checked it out a little bit this afternoon. The clutch is way out of alignment, soo it's not the sycros or a bearing most likely. Should I get the Steeda clutch kit (http://www.steeda.com/products/clutch_adjuster_kits.php) because I'll probably damage the quadrant if it isnt already serevely damaged sooner or later. Does anyone know of anything cheaper maybe that will be of good quality?

_____________________________

http://www.theautolog.com/94gt-1

(in reply to 94gtbuilder)

Post #: 6

RE: Shifting becoming a concern - 5/7/2008 10:06:10 AM

P.S.I.cho

Posts: 817
Joined: 3/10/2005
Status: offline
usually if these clutches are out of aligntment the quadrent has failed since the stock one is plastic, you may not need the entire adjustable clutch kit but i really like my adjustable cable, but if you dont want to spend the money try getting a new quadrent

_____________________________

95 gt vert
331 stroker
d-1sc @ 10 lbs
582 rwhp 511 ft. Tq
too much to list
http://www.cardomain.com/ride/2364369/1
my videos
http://videos.streetfire.net/uploaded/vertstang95.htm

(in reply to 94gtbuilder)

Post #: 7

RE: Shifting becoming a concern - 5/7/2008 11:05:27 AM

94gtbuilder

Posts: 130
Joined: 1/24/2008
Status: offline I think I'll just get the entire kit. The guy before me probably never changed it soo it probably wouldnt hurt to get a new clutch cable and the firewall adjuster is just conveinent in my opinion, and really only like 15 bucks compared to if u buy everything seperate.

_____________________________

http://www.theautolog.com/94gt-1

(in reply to P.S.I.cho)

Post #: 8

Login OR Register now to post a reply to this forum topic.

Page: [1]