1.7 RR WITH COMP XE270HR CAM W/114LSA ???

Printable Version

Mustang Forums >> Ford Mustang Tech >> 5.0 Mustang >> Speed Density/Carb/SSP section >> 1.7 RR WITH COMP XE270HR CAM W/114LSA ???

Page: [1]

Login Message << Older Topic   Newer Topic >>

1.7 RR WITH COMP XE270HR CAM W/114LSA ??? - 5/5/2008 2:53:52 PM    87 T TOP GT302   Posts: 27 Joined: 3/6/2008 Status: offline Can I use my crane  1.7 roller rockers with the comp xe270hr cam with 114 lsa? I know that comp makes a cam for 1.7 rr but it's with 112 lsa and i've heard and read you need to stay with 114 lsa. when you have speed density. < Message edited by 87 T TOP GT302 -- 5/6/2008 11:51:46 AM > Post #: 1

RE: 1.7 RR WITH COMP XE270HR CAM W/114LSA ??? - 5/27/2008 6:51:14 PM    ZachW04Stang Posts: 4291 Joined: 7/17/2004 From: Westminster, MD Status: offline You will need to check clearances but I'm sure you will be fine. With my old motor in my 87 with the same cam and 1.6 rockers w/ gt40p's I had .110" of clearance on both the intake and exhaust side. _____________________________ http://www.youtube.com/86zach 84 Mustang SVO (in reply to 87 T TOP GT302) Post #: 2

Forum Rules & FAQ Today's Posts Most Active Topics RSS Feeds Make A Donation Mustangs: Classic Mustang Mustang II Fox Body Mustang sn95 Mustang New Edge Mustang s197 Mustang Mustang Clubs 2007 GT500 Mustang 2009 Mustang Ford Mustang Prices

Featured Sponsors

Advertising Info

Top 10 Posters
pro50sc 17932 nanaki 14694 dan04cobra 14536 88bluegt 14536 addermk2 14023 ride of the 13720 hotrods_n_bo 13332 2000gt4.6 12516 mustangman02 11995 1slo85 11791

New Vendors
Extreme Dimension
BMR Fabrication
Year One
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
BrandMotion