did I read somewhere that the V6s have a tighter turning radius than the GTs? And that I can make my v6 turning radius the same as a GT if I get a GT part?

I only ask because through my research the 17x9 wheel with a 275 tread width was not suppose to rub on the new edge cars however mine does slightly when the wheel is completely cranked over. Its not a big deal but if I can correct the steering so that if someone else drives my car, it wont rub, Id like to do that.

Turning radius should be the same.
275 width on front tires might rub depending on what brand you have. Not all of them are the same width (even though the numbers say they are). Also has a lot to do with the offset of the wheel you are using.

It is the same.

We have straight-line cars, so turning radius= crap

on the sn-95's, you can put termi LCA's on and reduce radius by 10%!

I thought that the Termi front LCA's only shortened the turning radius of the 94-98 SN95's? Not the 99-04 turning radius?

The wheels are 17x9 03 Cobras from American Muscle with the Sumitomo tires. if they rub a bit, then they rub a bit. Its very seldom that I ever have the wheel cranked that far and knowing about it, it should happen even less. I must have misread something about the turning radius before.