|
tfyzorg2 -> UDP removal (5/4/2008 7:25:53 PM)
|
Hey guys, about a year ago I had a UDP installed on my v6...
Ive only put about 5k miles since its been installed, and my alternator is already failing because of it. (when I hold throttle higher, my battery gauge goes to normal, when I go back to idle, it drops to L. even with a new battery.
I need to know how to change my pulley back to the stock one
what are the parts/tools i need?
I know I need a harmonic balancer tool but im not sure what else...
Thanks guys
|
|
|
|
