headrest removal

Printable Version

Mustang Forums >> Ford Mustang Tech >> General Tech >> headrest removal

Page: [1]

Mustang Forums Sponsor   General Tech Forum Sponsored by Edelbrock

Login Message << Older Topic   Newer Topic >>

headrest removal - 5/4/2008 8:43:20 AM    92redgtstang   Posts: 26 Joined: 12/1/2007 Status: offline how do you get the headrest off?  is there a catch somewhere? not sure if it makes a diff, but i have 92 gt vert. Post #: 1

RE: headrest removal - 5/4/2008 8:57:14 AM    2k1gt Posts: 3166 Joined: 3/7/2004 From: Ole Miss Status: offline Yes there is a catch. I played with mine for a long time before I could get it off. Just find something flat to stick down there and try to release the catch.  _____________________________ Magnaflows, Mac H-pipe, Densecharger, C&L Plenum, 75mm TB, Steeda Underdrive Pulleys HID Kit from www.americanmuscle.com (in reply to 92redgtstang) Post #: 2

RE: headrest removal - 5/4/2008 9:02:00 AM    ALMOST STOCK Posts: 981 Joined: 5/13/2007 Status: online If you stick the hacksaw blade in the front side of the headrest, it will keep the crook from popping in the groove on the headrest mount bar. There is one crook in the top part of the spring and one crook in the bottom part of the spring. I suspect that it may be easier if you insert the hacksaw blade from the bottom on the front side. _____________________________ (in reply to 92redgtstang) Post #: 3

RE: headrest removal - 5/4/2008 9:05:38 AM    ALMOST STOCK Posts: 981 Joined: 5/13/2007 Status: online This should help? _____________________________ (in reply to 92redgtstang) Post #: 4

RE: headrest removal - 5/4/2008 9:12:41 AM    ALMOST STOCK Posts: 981 Joined: 5/13/2007 Status: online And the Ford Shop Manual tells you to do it this way. _____________________________ (in reply to ALMOST STOCK) Post #: 5

RE: headrest removal - 5/8/2008 9:22:50 PM    ronsfun96gt   Posts: 55 Joined: 8/21/2007 Status: offline My son tried one day for a half hour to remove headrest. I will tell him what you said _____________________________ 96 GT Vert., was auto now 5 spd, BBK CAI, Summit U/D pullies, Flowmaster 40's catback, BBK catless H pipe, SCT Xcal.2, UPR billet interior, CDC lightbar, Steeda Tri-ax, Spec clutch kit, 95 cobra R's 17x9 w/ 245 front & 275 rears, Eibach Pro's, FRPP 4.10 (in reply to ALMOST STOCK) Post #: 6

Login OR Register now to post a reply to this forum topic.

Page:   [1]

Forum Rules & FAQ Today's Posts Most Active Topics RSS Feeds Make A Donation Mustangs: Classic Mustang Mustang II Fox Body Mustang sn95 Mustang New Edge Mustang s197 Mustang Mustang Clubs 2007 GT500 Mustang 2009 Mustang Ford Mustang Prices

Featured Sponsors

Advertising Info

Top 10 Posters
pro50sc 17932 nanaki 14694 dan04cobra 14536 88bluegt 14536 addermk2 14023 ride of the 13720 hotrods_n_bo 13332 2000gt4.6 12516 mustangman02 11995 1slo85 11791

New Vendors
Extreme Dimension
BMR Fabrication
Year One
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
BrandMotion