Jazzer with a stiff one

Mustang Forums Mustang Classifieds Photo Gallery Calendars Search Live Chat Contact MF Sponsors
Mustang Recalls Mustang TSB's News Timeslips Timeline Wallpaper Member List Register Login

Jazzer with a stiff one

Printable Version

Mustang Forum >> Ford Mustang Tech >> Saleen, Roush and Boss Mustangs >> Jazzer with a stiff one

Page: [1]

Message

<< Older Topic Newer Topic >>

Jazzer with a stiff one - 5/2/2008 7:26:41 AM

Jazzer The Cat

Posts: 2746
Joined: 6/8/2006
From: SF Bay Area
Status: offline

Took a pic the other day while replacing the gear fluid in axle. Note the jack stand is ONLY on the drivers side and wheels are nearly same distance from the ground

J. Geils got NOTHIN' on MY Freeze Frame!

Jazzer.............................. Feelin' it

< Message edited by Jazzer The Cat -- 5/2/2008 7:27:51 AM >

_____________________________

#02-0014

The Jazzers egomaniacal road trip down look-at-me lane ***updated 7/14***

Post #: 1

RE: Jazzer with a stiff one - 5/2/2008 8:05:01 AM

HaneyMotorsport.Com

Posts: 1105
Joined: 4/7/2006
Status: offline

That is sweet Jazz... I also like the angle of the shot!

Casey

_____________________________

(in reply to Jazzer The Cat)

Post #: 2

RE: Jazzer with a stiff one - 5/2/2008 12:37:18 PM

C.Saleen

Posts: 128
Joined: 3/19/2005
Status: offline

Jazzer I know you have subframes, but I still wouldnt open doors with the car on jackstands, some times these unibodys can be funky, and clean above that exhuast tip!

(in reply to HaneyMotorsport.Com)

Post #: 3

RE: Jazzer with a stiff one - 5/2/2008 12:57:06 PM

eviligloo

Posts: 855
Joined: 2/8/2007
Status: offline

wow! that's impressive!!

_____________________________

2002 S281SC Saleen Mustang Speedster Convertible
66mm Chicane Pulley
SVT Focus Fuel Pump
3.73 gears
NGK spark plugs
PIAA fog lights
SCT tune

(in reply to Jazzer The Cat)

Post #: 4

RE: Jazzer with a stiff one - 5/2/2008 12:58:16 PM

cbgammel05

Posts: 416
Joined: 11/10/2007
Status: offline

i can see your undercarriage....tee hee

_____________________________

2006 S-281 SC #1244
"So you have enemies? good, that means you stood up for something at some point in your life."

(in reply to C.Saleen)

Post #: 5

RE: Jazzer with a stiff one - 5/2/2008 9:39:17 PM

spederman

Posts: 346
Joined: 2/22/2005
Status: offline

wow. very cool. is that because of your rear suspension setup? cause mine sure as hell doesnt do that, lol.

_____________________________

2002 4.6L 5 spd. S281
Intercooled Vortech S trim and all the avg bolt ons
Dyno #'s w/3.2 pulley@8psi: 405 rwhp/400 rwtq

(in reply to cbgammel05)

Post #: 6

RE: Jazzer with a stiff one - 5/2/2008 10:12:32 PM

PolkThug

Posts: 1781
Joined: 5/22/2005
Status: offline

Griggs FTW!

(in reply to spederman)

Post #: 7

RE: Jazzer with a stiff one - 5/2/2008 10:14:42 PM

sxynerd

Posts: 4775
Joined: 2/4/2006
Status: offline

Looks great!

_____________________________

436rwhp 410rwtq

(in reply to PolkThug)

Post #: 8

RE: Jazzer with a stiff one - 5/2/2008 10:22:31 PM

06Saleen3V

Posts: 5691
Joined: 4/1/2007
Status: offline

quote:

ORIGINAL: PolkThug

Griggs FTW!

and empty wallet

Very cool Eric!

_____________________________

Saleen Barricade
http://www.modernmustangmuscle.com/features/barricade.html

(in reply to PolkThug)

Post #: 9

RE: Jazzer with a stiff one - 5/3/2008 12:14:21 AM

06SALEENWHTVERT

Posts: 28
Joined: 2/29/2008
Status: offline

Nice set up!

_____________________________

Bowties are for boys........
2006 Saleen convertible #617
2005 Mustang GT-R.I.P
1995 Mercedes S-420 P.O.S

(in reply to 06Saleen3V)

Post #: 10

RE: Jazzer with a stiff one - 5/3/2008 6:34:12 AM

Jazzer The Cat

Posts: 2746
Joined: 6/8/2006
From: SF Bay Area
Status: offline

quote:

ORIGINAL: C.Saleen

Jazzer I know you have subframes, but I still wouldnt open doors with the car on jackstands, some times these unibodys can be funky, and clean above that exhuast tip!

Not a prob

I am running a 3/4" x 1.5" solid-steel bar welded between front and rear frames underneath. In addition, running and 1.5" square tube welded into front-half of frame and into rear frame.

YES, I have Griggs Racing to thank for this

And YES, and empty wallet..... 100% fine with that too

Jazzer doin' the

Thanks pepes

_____________________________

#02-0014

The Jazzers egomaniacal road trip down look-at-me lane ***updated 7/14***

(in reply to C.Saleen)

Post #: 11

RE: Jazzer with a stiff one - 5/3/2008 6:19:24 PM

mills281e

Posts: 1449
Joined: 8/27/2006
Status: offline

Wow.....that's pretty crazy

! I thought you photoshopped a jackstand out of there at first.

_____________________________

2002 Saleen S281 Extreme #46
Chicane Intercooler & pulley; SCT Chip & Tune; 3.73's; 90mm SCT MAF; 70mm ACCUFAB TB; KB Boost-A-Pump
1997 SVT Cobra #5726 (SOLD)

(in reply to Jazzer The Cat)

Post #: 12

RE: Jazzer with a stiff one - 5/5/2008 6:32:25 AM

04#231SC

Posts: 506
Joined: 6/21/2007
Status: offline

Hey Jazzer have you poseted before what was done to get you that stiffy? Costs etc? If you dont want to that is fine but I am curious as to whether the interior had to come out to get anything welded in place, as I'd like to avoid that if possible?

Thanks

Peace.

_____________________________

2004 #231 SC Convertible Triple Black
MGW Shifter
Accufab 75 MM TB
JLT Cold Air Intake
Focus Fuel Pump
Chicane 66mm Pulley
3:73 gears
SCT Tune

More to come.

Previous
88 GT (sold)
89#709 Saleen Coupe (sold) But not forgotten

(in reply to mills281e)

Post #: 13

RE: Jazzer with a stiff one - 5/5/2008 5:26:42 PM

Jazzer The Cat

Posts: 2746
Joined: 6/8/2006
From: SF Bay Area
Status: offline

Hey, 04. You can take a stroll down Jazzers "ME"mory lane and can see some pics I took.

As for interior removal....... YES! all the way down to the steel! A 1.5" square tube was welded into the sub-frame below the drivers feet and up against the "hump" (don't know what to call that thing) It is directly behind your heals if you were to sit in the back seat and goes from one side of car to the other. In one pic, you can see the tube actually exits out from behind the drivers seat and had to be covered with carpet. There is about 3/4" space between the bottom of the tube and the floor.

All this can be yours for $13k

_____________________________

#02-0014

The Jazzers egomaniacal road trip down look-at-me lane ***updated 7/14***

(in reply to 04#231SC)

Post #: 14

RE: Jazzer with a stiff one - 5/6/2008 9:55:28 AM

04#231SC

Posts: 506
Joined: 6/21/2007
Status: offline

Holy Crap... 13K? Wow I am sure that eats a lot of German and Italian/ American now in the twisties. Do you SCCA the car? I will take a look at the Griggs site at some point to see what I can do for some immediate gains without a full blown tear down. if I spent 13K on the car the wife would force me to spend another 13K on her..

Thanks for getting back to me.

I just took the stroll down Jazzer lane and looked at the pictures. I see you got the Eliot Spitzer Emperors Club Edition with the hood ornament hence the additional $$. Very nice!!

Peace.

< Message edited by 04#231SC -- 5/6/2008 9:58:24 AM >

_____________________________

2004 #231 SC Convertible Triple Black
MGW Shifter
Accufab 75 MM TB
JLT Cold Air Intake
Focus Fuel Pump
Chicane 66mm Pulley
3:73 gears
SCT Tune

More to come.

Previous
88 GT (sold)
89#709 Saleen Coupe (sold) But not forgotten

(in reply to Jazzer The Cat)

Post #: 15

RE: Jazzer with a stiff one - 5/7/2008 6:41:38 AM

Jazzer The Cat

Posts: 2746
Joined: 6/8/2006
From: SF Bay Area
Status: offline

$26k for a happy wife AND a beast on the twisties......? Sounds like your gettin' off cheap

I have not taken to an SCCA, but will take out to the track at some point.

Jazzer