Mustang Forums   Mustang Classifieds   Photo Gallery   Calendars   Search   Live Chat   Contact MF   Sponsors
  Mustang Recalls   Mustang TSB's   News   Timeslips   Timeline   Wallpaper   Member List   Register   Login

GT takeoff suspension

  Printable Version
Mustang >> Ford Mustang Tech >> 2005 - 2008 Mustangs >> 4.0L V6 Specific >> GT takeoff suspension Page: [1]
Login
Message << Older Topic   Newer Topic >>
GT takeoff suspension - 4/30/2008 11:40:18 PM   
Lethaldosage423


Posts: 245
Joined: 4/17/2008
Status: offline
So im only 17, im paying for my car monthly and saving for mods. i just treated myself to a GT muffler which sounds sweet, took me 45 mins to install. I was offerd a set of stock GT suspension I am going to get it because i cant afford the ones on the Steeda site.
I was wondering if this will just "Bolt straight on" or if i will have to change anything else?
Apriciate the help,

-Chris


_____________________________


05 Pref. White, GT takeoff single muffler, GT front&rear suspension, 15% tint, 17x9 Bullitts, GT front coming part by part. My dads got an 06 black GT-Lucky him
Post #: 1
RE: GT takeoff suspension - 5/1/2008 3:53:24 AM   
Mustangs4U


Posts: 72
Joined: 3/24/2008
From: Dayton, OH
Status: offline
I just ordered my GT take off muffler as well. It should be here on Tues....I can't wait. I'm glad to hear that it sounds great. Was there a big difference in sound?

As far as suspension, I'm not sure....sorry

_____________________________

2006 Mustang V6 Tungsten Grey w/ -Pony Package-
-IUP Steering Wheel/shift knob
-GT M/T take off muffler
-Saleen Short Shifter

(in reply to Lethaldosage423)
Post #: 2
RE: GT takeoff suspension - 5/1/2008 4:34:04 AM   
GrayPony


Posts: 684
Joined: 6/3/2006
Status: offline
The only GT suspension parts that would be of benefit are the sway bars. The front is a larger diameter and unless you have a PP you don't have a rear bar. The rear springs are the same and the front's have a different spring rate because of the added weight of the V8. Grab the sway bars then search the forum for the "how to" and the required hardware.
I'm sure 157db will chime in shortly and tell you to get poly bushings as well

_____________________________


(in reply to Mustangs4U)
Post #: 3
RE: GT takeoff suspension - 5/1/2008 6:34:27 AM   
157db


Posts: 5094
Joined: 5/16/2007
From: NW Arkansas
Status: offline
quote:

ORIGINAL: GrayPony

The only GT suspension parts that would be of benefit are the sway bars. The front is a larger diameter and unless you have a PP you don't have a rear bar. The rear springs are the same and the front's have a different spring rate because of the added weight of the V8. Grab the sway bars then search the forum for the "how to" and the required hardware.
I'm sure 157db will chime in shortly and tell you to get poly bushings as well


Yes, poly bushings all around. Moss mustang. Prothane brand. Cheap.
http://www.mossmustang.com/Shop/SearchResults.aspx?SearchText=prothane&WebCatalogID=0

Bushings
055-100 Prothane Bushings - Front Sway Bar - 34mm
05-08 All
$6.95

Bushings
055-101 Prothane Bushings - Rear Sway Bar - 20mm
05-08 All
$24.95
The site shows a 28mm bushing for the V6 front sway bar??????
The front GT take-off is 34mm compared to the V6 and PPs 31.5mm bar.
The rear PP sway is 18mm and the GT take-off is 20mm. You will need
hardware and be sure the rear take-off has the brackets if you dont
have a PP with the rear 18mm sway bar.


Thumbnail Image



Thumbnail Image


http://iihs.net/fsm/?dir=65&viewfile=Stabilizer%20Bar%20Link.pdf
http://iihs.net/fsm/?dir=65&viewfile=Stabilizer%20Bar.pdf
http://iihs.net/fsm/?dir=61&viewfile=Stabilizer%20Bar.pdf
http://iihs.net/fsm/?dir=61&viewfile=Stabilizer%20Bar%20Link.pdf
http://iihs.net/fsm/?dir=61&viewfile=Stabilizer%20Bar%20Bushing.pdf

Attachment (2)

< Message edited by 157db -- 5/1/2008 6:57:43 AM >


_____________________________

AiRaid CAI
Saleen Short Shifter
F/R GT Sways
GT M/T TakeOff Muffler
Roush Rear Shocks/Springs
Roush Hoodscoop
Roush Window Louvers
SS Eleanor Grill
Pony Emblems
CDC Decklid Panel
CDC Sequentials
Raptor Shift Light
MSD DashHawk

(in reply to GrayPony)
Post #: 4
RE: GT takeoff suspension - 5/1/2008 3:42:27 PM   
Lethaldosage423


Posts: 245
Joined: 4/17/2008
Status: offline
Im looking into it as we speak, the GT suspension will only be temp until i get promoted, i live on a windy road and love taking the turns at speed and sticking to the road like i do when im driving my dads GT.

I stuck with the single pipe and just changed my muffler, it sound really good. its pretty nice when you take off from a stop light with your windows open and you can hear it. My MPG dropped because i kept doing this but i wanted to hear it. when your cruising with windows up its not loud at all. I didnt want to go with the Dules because its just a v6 and i didnt want to over do it and make it sound Ricey.


_____________________________


05 Pref. White, GT takeoff single muffler, GT front&rear suspension, 15% tint, 17x9 Bullitts, GT front coming part by part. My dads got an 06 black GT-Lucky him

(in reply to 157db)
Post #: 5
RE: GT takeoff suspension - 5/1/2008 5:27:35 PM   
StreamlineStang

 

Posts: 349
Joined: 11/24/2007
From: Wittmann, AZ
Status: offline
The GT sways should be good enough unless you're at the track 24/7. I have the V6 PP sways and the car sticks to the ground perfectly fine. Reguarding the GT muffler, I highly recomend it, sound is way better than stock, looksa hell of a lot better (if you have the polished tip), good for a 7rwhp gain, helps your mpg by around 2 (if you can keep your foot off the gas pedal, and even weights less than the V6 muffler haha. Oh I would also recomend painting the muffler black, it looks a lot better IMO and is only a couple bucks to do so with some high temp paint. Just let it dry for a day or so.

_____________________________

2007 SS Mustang V6 Premium
Gray Leather Interior, Manual, V6 PP, Interior Upgrade Package, 35/20 Tint, Silver 17" Bullitts, GT Spoiler, GT M/T Muffler, CF dash, Carbon Creations OEM CF Hood, Roush Louvers, Roush Retro Knob, And Sweet Mustang Floor Mats

(in reply to Lethaldosage423)
Post #: 6
RE: GT takeoff suspension - 5/2/2008 7:24:53 AM   
157db


Posts: 5094
Joined: 5/16/2007
From: NW Arkansas
Status: offline
quote:

ORIGINAL: StreamlineStang

Oh I would also recomend painting the muffler black, it looks a lot better IMO and is only a couple bucks to do so with some high temp paint. Just let it dry for a day or so.



Thumbnail Image


Attachment (1)

_____________________________

AiRaid CAI
Saleen Short Shifter
F/R GT Sways
GT M/T TakeOff Muffler
Roush Rear Shocks/Springs
Roush Hoodscoop
Roush Window Louvers
SS Eleanor Grill
Pony Emblems
CDC Decklid Panel
CDC Sequentials
Raptor Shift Light
MSD DashHawk

(in reply to StreamlineStang)
Post #: 7
RE: GT takeoff suspension - 5/2/2008 11:54:40 AM   
Lethaldosage423


Posts: 245
Joined: 4/17/2008
Status: offline
quote:

ORIGINAL: StreamlineStang

The GT sways should be good enough unless you're at the track 24/7. I have the V6 PP sways and the car sticks to the ground perfectly fine. Reguarding the GT muffler, I highly recomend it, sound is way better than stock, looksa hell of a lot better (if you have the polished tip), good for a 7rwhp gain, helps your mpg by around 2 (if you can keep your foot off the gas pedal, and even weights less than the V6 muffler haha. Oh I would also recomend painting the muffler black, it looks a lot better IMO and is only a couple bucks to do so with some high temp paint. Just let it dry for a day or so.


I wish i could keep my foot off it, my MPG is down to 18 because i keep punching it at stop lights just to listen to it, ill get used to it, ive got a half a tank of gas left and when i see how much it costs me to fill up next time, ill be taking it easy.
I got it from Craigslist for $40. It was a take off with less than 100 miles on it.
The suspension im getting from the same guy for just $100, thats also practically brand new. im thinking of painting it before i put it one, what will go well with high preformance white?

I baught my car used its an 05 it has no fogs and the stock rims but leather seats, MY Color and all that stuff and the black side skirts, is this like a pony package, i wasnt sure because i dont have the fogs or bullitt wheels?

_____________________________


05 Pref. White, GT takeoff single muffler, GT front&rear suspension, 15% tint, 17x9 Bullitts, GT front coming part by part. My dads got an 06 black GT-Lucky him

(in reply to StreamlineStang)
Post #: 8
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 

 
Mustang Forum >> Ford Mustang Tech >> 2005 - 2008 Mustangs >> 4.0L V6 Specific
Jump to:
Forum Rules & FAQ
Today's Posts
Most Active Topics
RSS Feeds
Make A Donation

Mustangs:
Classic Mustang
Mustang II
Fox Body Mustang
sn95 Mustang
New Edge Mustang
s197 Mustang
Mustang Clubs
2007 GT500 Mustang
2009 Mustang
Ford Mustang Prices


Featured Sponsors
Advertising Info

Top 10 Posters
pro50sc17932
nanaki14694
88bluegt14536
dan04cobra14536
addermk214023
ride of the 13720
hotrods_n_bo13332
2000gt4.612516
mustangman0211995
1slo8511791

New Vendors
Extreme Dimension
BMR Fabrication
Year One
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
BrandMotion

MustangForums.com is not affiliated with or endorsed by Ford Motor Company.