Sub Frame Connectors (Full Version)

Mustang Forum >> Ford Mustang Tech >> General Tech >> Convertible Tech

Sub Frame Connectors

  

Round 2 -> Sub Frame Connectors (4/30/2008 3:55:33 PM)

I have a 2000 GT Conv. and was wondering what the best Subframe connectors to weld on for improved structural support would be. I have looked at the Roush QL, but wondered if it was worth the money, The Steeda FL are much less. Also, has any one done this addition to their Convertible themselves?
Thanks, This is my first post!

-Neal

  
PUDman -> RE: Sub Frame Connectors (4/30/2008 4:59:58 PM)

i've got an '86 and made my own. i own a machine shop so have access to all good things. i made them from as far forward i could go all the way back. can't help you on the different aftermarket stuff, but i highly recommend getting some. you will notice a big difference. no more body twist in the corners. good luck

  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.