Stock 03 Cobra blower price

Printable Version

Mustang Forums >> Ford Mustang Tech >> 4.6 (Modular) Mustang >> SVT Forums >> Stock 03 Cobra blower price

Page: [1]

Login Message << Older Topic   Newer Topic >>

Stock 03 Cobra blower price - 4/29/2008 11:56:00 PM    WhiteLightning00   Posts: 9 Joined: 12/2/2007 Status: offline How much do the stock 03 Cobra blower's normally go for?  There's one for sale locally that I think is fairly priced.  I'm thinking about customizing to get it fit on my 5.0, but I would like to check how much the sell for before I decide to buy it. Post #: 1

RE: Stock 03 Cobra blower price - 4/30/2008 12:24:33 AM    Ehmark Posts: 569 Joined: 3/1/2007 From: Napa CA Status: offline They are really cheap but good luck getting it to fit a 5.0 _____________________________ 1996 gt with 4v swap , Visteon racing radiator, BBK coldair, Flowtech x pipe ,Steeda side exhaust, spec stage II , Nitto NT-01''s and motive 4.30''s 282 Rwhp 274Rwtq (in reply to WhiteLightning00) Post #: 2

RE: Stock 03 Cobra blower price - 4/30/2008 8:13:28 AM    LilRoush   Posts: 2349 Joined: 2/26/2007 Status: offline I sold my last one for like $275. It was a low milage off an '04 with a 2.76" pulley. I've seen most at about $300 lately. _____________________________ ~Matt 2000 Roush #5004 M112 SCd (in reply to Ehmark) Post #: 3

RE: Stock 03 Cobra blower price - 4/30/2008 8:13:29 AM    Blownsvt Posts: 1996 Joined: 7/29/2006 Status: offline you can get one for 250-400 but like he said getting one onto a 5.0 is no easy task. _____________________________ 2003 10th cobra 763.8 rwhp 822rwtq @ 21#''s (in reply to Ehmark) Post #: 4

RE: Stock 03 Cobra blower price - 4/30/2008 9:46:54 AM    2k6silvergt   Posts: 369 Joined: 7/15/2006 Status: offline Most of them seem to be moving for $300-$400.  Sometimes you can get lucky and find one on ebay for a little less though. _____________________________ 2003 Cobra: jlt intake/accufab sbtb/steeda tri-ax/upr offroad x/magnaflow catback/irs brace/H&R sports/2.80 pulley & idler/Amazon tune 2006 Mustang GT: whipple supercharger/longtube headers/offroad h-pipe/magnaflow exhaust/4.10s/ custom dyno tune SOLD (in reply to Blownsvt) Post #: 5

RE: Stock 03 Cobra blower price - 4/30/2008 11:04:53 AM    LilRoush   Posts: 2349 Joined: 2/26/2007 Status: offline Shouldn't be any harder than slapping one on a V6 - both are pushrod motors. Hardest part will be running vaccum lines and hooking up the throttle cable. _____________________________ ~Matt 2000 Roush #5004 M112 SCd (in reply to 2k6silvergt) Post #: 6

RE: Stock 03 Cobra blower price - 4/30/2008 11:33:35 AM    WhiteLightning00   Posts: 9 Joined: 12/2/2007 Status: offline I'm getting basically a 'no don't do it', 'too much work for the worth' answers from the people I've been asking around.  They say I will need access to a machine shop, which I fortunately do.  Still trying to do research to figure out how to do this and all the 'don't do it' answers aren't helping any.  Also hood and pulley clearance is other issues brought up that I need to look into. (in reply to LilRoush) Post #: 7

RE: Stock 03 Cobra blower price - 4/30/2008 12:30:51 PM    mfj   Posts: 912 Joined: 8/20/2007 Status: offline don't do it _____________________________ 2001 SVT Cobra 5.1L Stroker, Ported 04 Cobra Heads, Stage 3 Cams, 3.4L Whipple, 28 psi... http://cardomain.com/id/martinfrenchjr (in reply to WhiteLightning00) Post #: 8

RE: Stock 03 Cobra blower price - 4/30/2008 1:30:40 PM    LilRoush   Posts: 2349 Joined: 2/26/2007 Status: offline Cowl hood to cover it. Problem solved. _____________________________ ~Matt 2000 Roush #5004 M112 SCd (in reply to mfj) Post #: 9

RE: Stock 03 Cobra blower price - 4/30/2008 2:33:32 PM    Stang9946 Posts: 1134 Joined: 5/5/2005 Status: offline Wait...so you're saying you can buy an 03/04 Termi EATON ROOTS BLOWER for UNDER $400?!?!  _____________________________ '97 SVT Cobra C&L RAI, Borla Stingers, Mac H-pipe, 3.73.1, UD Pulleys, 93 Brenspeed Tune, H&R Super Sports, Steeda Tri-Ax, J&M C/C Plates, Ultra Clear Markers, 1" Rear Billet Adapters, Nitto 555 245/45 (F),275/40 (R) (in reply to LilRoush) Post #: 10

RE: Stock 03 Cobra blower price - 4/30/2008 2:39:09 PM    rossn   Posts: 62 Joined: 11/11/2006 From: Cape Canaveral, FL Status: offline How much are the ported eaton's with the smaller pulley? (in reply to Stang9946) Post #: 11

RE: Stock 03 Cobra blower price - 4/30/2008 5:37:06 PM    Blownsvt Posts: 1996 Joined: 7/29/2006 Status: offline i sold my ported polished one for 900.  but unpolished they go for 6-700 i would guess. _____________________________ 2003 10th cobra 763.8 rwhp 822rwtq @ 21#''s (in reply to rossn) Post #: 12

RE: Stock 03 Cobra blower price - 4/30/2008 7:56:07 PM    xxkazp3rxx Team MF Member #5002 Posts: 5062 Joined: 12/4/2005 Status: offline Stock 300-400... Ported around 500-800 I got my stage 3 ported blower for like 500 i think (bad memory)... I wouldn't do it either - the Eaton is a horrible blower - runs very inefficient and hot. _____________________________ 2003 DSG Mach 1 1 of 1,595 2007 Ford Fusion SEL 2003 Ported Cobra.. Gone but not forgotten... (in reply to Blownsvt) Post #: 13

Forum Rules & FAQ Today's Posts Most Active Topics RSS Feeds Make A Donation Mustangs: Classic Mustang Mustang II Fox Body Mustang sn95 Mustang New Edge Mustang s197 Mustang Mustang Clubs 2007 GT500 Mustang 2009 Mustang Ford Mustang Prices

Featured Sponsors

Advertising Info

Top 10 Posters
pro50sc 17888 nanaki 14679 88bluegt 14535 dan04cobra 14518 addermk2 13959 ride of the 13696 hotrods_n_bo 13304 2000gt4.6 12513 mustangman02 11949 1slo85 11713

New Vendors
BMR Fabrication
Year One
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
4walls
BrandMotion