Mail order tune (Full Version)

Mustang Forums >> Vendors & Sponsors >> VMP Tuning

Mail order tune

  

byebyericeboy -> Mail order tune (4/29/2008 8:02:46 PM)

yes i just purchased a saleen blower for my 06 gt and i have a bbk throttle body c&l racer intake 90mm mass airflow sensor 39lb injectors flow master axel backs and 285/30/18 on back and was wodnering if you can do a specific tune for that and if i was to buy the sct tuner from you what the prices would be like and if it would come preloaded on the sct2 or if i would have to get it off the comp. also im interested in continuing on this project and need to know how much mail tunes are for later mods. thanx
Andy

  
Shawn02GT -> RE: Mail order tune (4/29/2008 10:01:46 PM)

you'll find the answer to most of your questions on vmptuning.com.  Im sure he can make this tune for $250 remotely, but he might requested that you can datalog with a wideband AF gauge.  Im sure he can load the tune if you buy the tuner at the same time, the tune covers mods for 6 months else they are $50 for adjustments.  I would recommend that you email justin for clarification because he might not be checking all the forums he posts on.  goodluck!

Justin00Stang -> RE: Mail order tune (5/3/2008 7:56:28 AM)

quote:

ORIGINAL: byebyericeboy

yes i just purchased a saleen blower for my 06 gt and i have a bbk throttle body c&l racer intake 90mm mass airflow sensor 39lb injectors flow master axel backs and 285/30/18 on back and was wodnering if you can do a specific tune for that and if i was to buy the sct tuner from you what the prices would be like and if it would come preloaded on the sct2 or if i would have to get it off the comp. also im interested in continuing on this project and need to know how much mail tunes are for later mods. thanx
Andy


Hi, I can make a tune for that setup no problem, cost is $250 for remote tuning if you already have a tuner, and $450 if you need an x2.  Email me if you have any more questions justin@vmptuning.com

thanks

  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.