Fog Light wiring harness (Full Version)

Mustang >> Ford Mustang Tech >> 2005 - 2008 Mustangs >> 4.0L V6 Specific

Fog Light wiring harness

  

Lariat -> Fog Light wiring harness (4/25/2008 10:47:57 PM)

Can anyone tell me the Ford part number for the foglight/headlight wiring harness? I have the switch, just need the harness. Ford has a grill/foglight kit that comes with the switch, foglights, harness and grill, all I need is the harness. Any help would be greatly appreciated. Wayne

  
Maverickaf17 -> RE: Fog Light wiring harness (4/26/2008 7:55:15 AM)

Don't buy it from Ford, they will overcharge you.

Try www.blueovalindustries.com they have it for $79.99 which is the average price. If not there, there are plenty of others websites. Even try www.v6mustangstuff.com and they have it too.

157db -> RE: Fog Light wiring harness (4/26/2008 8:21:46 AM)

quote:

ORIGINAL: Lariat

Can anyone tell me the Ford part number for the foglight/headlight wiring harness? I have the switch, just need the harness. Ford has a grill/foglight kit that comes with the switch, foglights, harness and grill, all I need is the harness. Any help would be greatly appreciated. Wayne


Avoid blueovalindustries. [:'(]
Street Scene sells one thru CaliforniaMustangs for $79
as well as the OEM GT headlight switches or you could
get one off eBay that works with the OEM GT fog light
capable headlight switch.
http://cgi.ebay.com/ebaymotors/05-08-2005-2006-2007-2008-Mustang-Fog-light-Harness-GBC_W0QQcmdZViewItemQQcategoryZ33709QQihZ010QQitemZ200217060615QQrdZ1QQsspagenameZWDVW
I have done this and have all the knowledge you need to complete the job.
I did mine with a custom harness I made thats just as good if
not better than the ones available aftermarket.
The FORD grill kit is basically just an aftermarket type harness
and is nothing like the OEM factory installed fog light harness
wiring. What grill are you installing? GT or Pony type fogs?

[image]local://upfiles/69445/61D30598101C4AEEB37BB5F9B66C79AB.jpg[/image]

05nightrider -> RE: Fog Light wiring harness (4/26/2008 8:46:41 AM)

im still trying to figure out my fog situation... i have a gt takeoff grill and need the harness.. my sixxer originally had no fogs and i want to do the pull out switch from the regular light switch... help?  either that or id even be ok with tapping into it and having the fogs come on when i turn the lights on... not the parking lights just full headlamps

157db -> RE: Fog Light wiring harness (4/26/2008 9:08:17 AM)

quote:

ORIGINAL: 05nightrider

im still trying to figure out my fog situation... i have a gt takeoff grill and need the harness.. my sixxer originally had no fogs and i want to do the pull out switch from the regular light switch... help?  either that or id even be ok with tapping into it and having the fogs come on when i turn the lights on... not the parking lights just full headlamps



I tapped into the BEC under the hood to gain access to fused 12V at
the OEM fog lamp fuse location with a homemade, autozone available,
fuze tapper. Then I replaced the OEM V6 healight switch with a GT/Pony
headlight switch with the fog light option. The fog light wire from the switch
was then cut and the portion going to the SJB was taped off and the switch
end was extended to under the hood area by the PCM. I also cut the fog
indicator wire and extended this to under the hood by the PCM also.

[image]local://upfiles/69445/F8196AF48AFF42B9917E3A7942B8080B.jpg[/image]

[image]local://upfiles/69445/315109875943426FA4F036C3FFB04139.jpg[/image]

157db -> RE: Fog Light wiring harness (4/26/2008 9:14:19 AM)

The wire from the fog switch was wired to the ground side of the coil
of the 40A lighting relay and 12V to the other side of the coil. The common
of the relay contacts is wired to the same fused 12V for the fogs.
The normally open of the contacts is wired to the fog lamps and the
fog indicator wire from the switch. I also added a high beam relay that
turns on the fog lamps with the high beams if they are not already on.
The mechanical interlock of the GT headlight switch allows for the ding
ding of - you left your lights on, idiot - when you exit the vehicle.
Something the add a non OEM switch kits dont do and the fogs get
left on all the time.
http://iihs.net/fsm/?dir=40&viewfile=Headlamps.%20Autolamps.pdf
http://iihs.net/fsm/?dir=40&viewfile=Fog%20Lamps.pdf

[image]local://upfiles/69445/10CB32E251474D2396E999E30A4BA0BE.jpg[/image]

157db -> RE: Fog Light wiring harness (4/26/2008 9:23:54 AM)

quote:

ORIGINAL: 05nightrider

im still trying to figure out my fog situation... i have a gt takeoff grill and need the harness.. my sixxer originally had no fogs and i want to do the pull out switch from the regular light switch... help?  either that or id even be ok with tapping into it and having the fogs come on when i turn the lights on... not the parking lights just full headlamps


You plan on stuffin that GT grill into a V6 bumper facia.
I would not recommend that. Been there, tried to do that.
The GT grill is bigger and slightly different how it mounts
than the V6 grill. Get a good aftermarket V6 to GT grill
conversion and save yourself some trouble and heartache. [;)]

[image]local://upfiles/69445/D4B421314C8F41B9860B6A6F4734F4DB.jpg[/image]

[image]local://upfiles/69445/63F3B89037CD413E9B9FF2F269347671.jpg[/image]

05nightrider -> RE: Fog Light wiring harness (4/26/2008 3:35:23 PM)

no i have a gt bumper with the gt grill... so it fits perfectly lol  i hated the v6 bumper... yuck.. jmo tho

157db -> RE: Fog Light wiring harness (4/28/2008 7:45:06 AM)

Double yuc but I am stuck with it for now [:o]

  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.