chrome wheel question (Full Version)

Mustang Forums >> Ford Mustang Tech >> Wheels & Tires brought to you by Tire Rack

chrome wheel question


  

fobra570 -> chrome wheel question (4/24/2008 4:45:01 PM)

alright so my buddy has cobra rims and the rims are like falling apart they are at least 5 years old anyways i was wondering if newer chrome rims are made any differently and if their is a difference in the chrome vs a replica cobra wheel off american muscle vs a true cobra wheel ?? i dont wanan b sitting here in a year looking at my rims and looking at the chrome just chip away or does that happen with all chrome wheels ?  



  

Stoenr -> RE: chrome wheel question (4/24/2008 4:53:01 PM)

pretty much happens to them all if they are driven in any weather and not maintained properly.  I will never own chrome wheels.


Jazzer The Cat -> RE: chrome wheel question (4/24/2008 5:45:18 PM)

I agree with Stoenr, but will continue to buy chrome rims anyway as they are bad a$$ [:)] 

My last pair of O.Z. Racing rims, on my '85 GT, went bad a the bead and were losing air pressure. Had to have all tires removed, and grind down surface to get smooth and do lots of prep work. They never leaked air over the next two years I had the car, but the chrome finish was compromised at that point and will eventually peel off toward the face and look [:'(]

                     Jazzer The Stubborn


fobra570 -> RE: chrome wheel question (4/25/2008 4:47:32 PM)

so if i keep any chrome rim clean and i keep it in the garage all year long and dont drive it in the winter think they will stay good ?


Jazzer The Cat -> RE: chrome wheel question (4/25/2008 5:47:06 PM)

Water and brake dust is the biggest enemy of chrome rims (asside from curbs [&:]) I you garage it and very aggressive on keeping clean, they will last many, many years. Eventually, the chrome may go bad at the bead where tire makes a seal to rim. I had this issue several years ago, and had to do a lot of work to repair. They held air for the next couple years and sold the car. Is safe to say, they will leak again at some point, and need to be replaced. They were 6 or 7 years old before they originally corroded at bead and was cheap chrome plating as well.

                 Jazzer


fobra570 -> RE: chrome wheel question (4/26/2008 3:41:02 PM)

http://www.americanmuscle.com/17x9-foxbody-style-cobra-r-wheels-silver.html

would these be considered a cheap chrome plating ??


Jazzer The Cat -> RE: chrome wheel question (4/26/2008 6:18:56 PM)

I cannot tell if they are cheap chrome plating or not, but American Muscle wheels are fine [:)].

                    I say, GO FOR IT!!!! [8D]

                   The Jaz


JTE_502 -> RE: chrome wheel question (4/26/2008 10:17:30 PM)

I have always wondered about having a set of chrome wheels clear powdercoated and seeing if that would help with the longevity of them and keep the chrome from peeling.  Anyone tried this or know if it would work?


Jazzer The Cat -> RE: chrome wheel question (4/27/2008 6:23:43 AM)

The issue I have had was the water in the lubricant that is used when the tire is mounted. If you ever watch, the installer uses a bottle-brush to get the bead of tire very wet, so the machine will slide along tire when it is being stretched to fit onto rim. That water gets trapped between tire bead and rim. Over time, that water will corrode the chromium much like aluminum that has been exposed to salt water, and leak air.

                                               Jazzer


fobra570 -> RE: chrome wheel question (4/27/2008 9:26:38 AM)

oic good c i wanna get these rims but im afraid of rub jazzer what size tire u think i should go with stock tire rims size is 245/45/17  wat size tire u think i should go with xxx/35/18 ?


Stoenr -> RE: chrome wheel question (4/27/2008 9:38:42 AM)

ALot of places have gone to mounted paste, vs the liquid tire lube.  Ask them if they have a paste they can use.


Jazzer The Cat -> RE: chrome wheel question (4/27/2008 5:39:58 PM)

I agree with Stoenr and recommend 265's to be safe for clearance. 275's should not be a prob, but you may have to roll fenders slightly to clear (probably not). I run 275/35/18"s on 9" rim and have only the slightest of contact between outside of drivers tire and plastic liner in wheel well during hard RH cornering and bump on turn.

                                    Jazzer


  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.