I just got the Paxton HO installed on my 05 Gt and was wondering if I should add the MSD COP's to prevent spark blow-out? I know our stock system is pretty good but I wonder if these would be that much better for the $$.
__________________
05 Torch Red GT Automatic
18" Black Bullets
Paxton HO Intercooled Brenspeed Tuned
Summit COP's
Roush Rear Springs
Paxton Crew Member
Sponsored Links
This ad is not displayed to registered members. Register your free account today and become a member on Mustang Forums!
According to most the stock Coils are good for well over 600RWHP. If you are running the HT0 plugs gapped correct you shouldnt have any blow out issues.
__________________
Scott
2007 Shelby GT
Performance White
Paxton Supercharged
4.10's
499rwhp 440rwtq
12.65 @ 114mph on stock street tires
According to most the stock Coils are good for well over 600RWHP. If you are running the HT0 plugs gapped correct you shouldnt have any blow out issues.
I had spark blowout at 10 PSI even with the HT0 gapped down so dont believe that for one minute. I have run OEM COPs, MSD COPs and Granatelli COPs to address this.
Granatelli COPs are the best of the three I have run. I have them on now but i also have a set of MSD COPs I can run. Either aftermarket COP relieved the spark blow-out completely but the performance was best on the GMS COps.
According to most the stock Coils are good for well over 600RWHP. If you are running the HT0 plugs gapped correct you shouldnt have any blow out issues.
I had spark blowout at 10 PSI even with the HT0 gapped down so dont believe that for one minute. I have run OEM COPs, MSD COPs and Granatelli COPs to address this.
Granatelli COPs are the best of the three I have run. I have them on now but i also have a set of MSD COPs I can run. Either aftermarket COP relieved the spark blow-out completely but the performance was best on the GMS COps.
Can you feel spark blow out? What's the symptoms?
__________________
whipple HO SC,FRPP springs, Pypes mid mufflers, Che adj. LCA, hurst, 4.10's, 1 piece DS, spec stg 2 clutch. Accel coils 12.52@117.6mph so far with a 2.01 60 ft time(pre shaft, coils, clutch).
Very interested to see how that goes. For me to lay out $500 for them though they would have to make like at least 15rwhp, as that money can go toward alot of different things. I doubt it, but would love to be proved wrong.
Should I Add New COP's ?
