claying my car now (Full Version)

Mustang >> Ford Mustang Tech >> Detailing

claying my car now


  

roghoge -> claying my car now (4/19/2008 8:33:18 PM)

do i clay the entire car, glass, headlights, plastic pieces or do i just clay the paint, normally would just pm juztang but dont think hes online and im doing this right now so...if anyones still awake...


  

ryan1994mustang -> RE: claying my car now (4/19/2008 8:43:24 PM)

you can clay everything, paint, glass, wheels, headlights.  i wouldnt clay any of the plastic trim though.  and make sure you put a coat of wax on after you clay it...


roghoge -> RE: claying my car now (4/19/2008 8:47:20 PM)

yeah im planning on polish, glaze, wax so im up for a long night and day tomorrow


buddy_boy8403 -> RE: claying my car now (4/19/2008 9:05:15 PM)

I have NEVER heard of claying. Someone, please explain the point of this... and where you get all of that clay.


ryan1994mustang -> RE: claying my car now (4/19/2008 9:48:09 PM)

the whole concept behind claying is to remove all of the little contaminants stuck in your paint.  right now, your paint may feel somewhat like sandpaper, but when you get through it will be as smooth as glass.  you can pick up claybar kits at pretty much any autoparts stores.  they usually consist of a spray lubricant (same as quick detailer) and a bar of clay.  you cant just go and pick up some modeling clay from the craft store and use that. clay bars also come in different agressiveness, some are made to pull more stuff out of your paint than others.  if you have never clayed your car, then it will probably benefit greatly from it.  run to autozone or somewhere, and pick up a kit (i prefer clay magic kit) which are usually between $10-20.  Its very easy to do, after you wash the car, just spray on some lubricant and gently rub the clay back and forth over the surface of the paint, no pressure needed.  clay a panel, then wipe off the spray, then knead the clay to get to a clean area of it, then start on the next panel.  whole process wont take more than 30 mins.  make sure you dont drop the clay, if you do, then trash it.  after you get done claying, then you are going to need to polish/wax like you normally do. 


buddy_boy8403 -> RE: claying my car now (4/19/2008 9:56:10 PM)

Very interesting. Very interesting. I think I will try it sometime. I have a Vert... is it okay to clay a vinyl top? That probably wouldn't do anything, would it?


DuFFMaNN -> RE: claying my car now (4/19/2008 10:00:41 PM)

No dont clay the vinyl


ryan1994mustang -> RE: claying my car now (4/19/2008 10:15:32 PM)

yeah, you wouldnt want to clay the vinyl.  that would just end up being a real mess.  you can pretty much clay anything that you wax; paint, rims, glass.


  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.