Ok well I think I got it...back board going across where his amps are..mount one amp facing rear seats, other on other side facing sub box...then sub box pushed up against it with bottom angled on weird angle part. Then another base-cover board in front of subs, so I can put my tools in my trunk without them puncturing the subs, and groceries etc. I have 16" to play with in the back of the trunk. so should be able to make it all fit hopefully. I guess I will do it all in separate pieces so if I go to the track I can take it all out easily. Sorry Ttocs and Seight for being such a pain. I know you guys were just telling me to go out and do it and that you couldn't help me out.
_____________________________
07 Black GT manual 3.55 gears C&L intake Evo tune MGW short shifter 14' shorty antenna 5% Limo Tinted windows, front turn signals, rear side markers
man I am sorry I have been such a D to you but you really do need to go get some experience, no better tool to learn on then your car. I know you have good intentions, we just need to direct them a little better...
My guess on that rach is that yes, he started with a single piece all the way across and mounted the amps to it and ran all the wiring for those 2, and the 3rd. Then using some kind of spacer(wood or metal depending on what is available) to get the one in the middle to stand off. The difficulty in doing it smoothly is that you have a lot of wires between the 3 sets of power wires, rca's and speakers before you take into account any external cross overs makes it alot to orchestrate to keep clean. It was not his first rodeo......
Printable Version
RE: looking for ideas for an amp rack - 
