I haven't done much with mine. But I've bought only MGW so far. I put in polished A/C knobs, radio knobs.
Sorry for the crappy lighting
_____________________________
2006 GT 5spd, Screaming Yellow, 296rwhp...311tq (Found out I had a vacuum leak. Hope these # are higher next time) BAMA 91 Race Tune FR 4.10 Steeda UPDs Airaid CAI MAC Attack: LTs + Prochamber + Catback Pro50 Shifter
If I can find my camera, I will try to get you some pics this weekend and post Mon. AM. So far, the only things I have done to my GT are the chrome interior accents. (speaker covers, cupholder insert, shifter surround and ends for the shifter, parking brake handle, and the knobs.) I think my favorite is the speaker covers, but all of it looks great.
My mod. budget just got cut in half......hubby just got an 08 GT/CS. So, now we have to order 2 for 1 stuff. It's cool he got his GT, but I still have sooo much stuff I want to do to mine. I haven't even started on the perf. or exterior stuff yet.
_____________________________
2008 White Mustang convertible GT SSInserts chrome billet interior accessories (Ready to add to the list!)
"It is not the critic who counts, not the man who points out how the strong man stumbled, or where the doer of deeds could have done better. The credit belongs to the man who is actually in the arena" T. R
I wouldn't mind going with MGW, but there is not much to chose from for the '05-'08. UPR is probably the route i will go (more selection). I would hate to mix and match between different companies and have the products not match. I would like to keep it all polished billet or chrome plated (don't know the difference). Thanks
I wouldn't mind going with MGW, but there is not much to chose from for the '05-'08. UPR is probably the route i will go (more selection). I would hate to mix and match between different companies and have the products not match. I would like to keep it all polished billet or chrome plated (don't know the difference). Thanks
Careful with the UPR ... I've seen a couple things from them that were less than stellar quality. Definitely get the MGW stuff you like and THEN pickup anything missing from UPR. It's ok to mix and match as long as you do it tastefully.
_____________________________
07 Black GT - Manual 35% Tint, GT500 rear spoiler, 3dCarbon Front Lip Corsa Crew Member
Another good source is SSinserts....got the ebrake handle, speaker covers, lock grommet, billet seat adjuster, etc from them..some of it pricey, but excellent quality.
< Message edited by TPony -- 4/15/2008 8:34:46 PM >
_____________________________
06 GT, tint, appearance mods, 18X9 w/NT555 255/45/18, GTA Axlebacks, GT500 spoiler/pedals. Many interior billet upgrades and engine dress up.
I have gotten all of my billet interior stuff from SSInserts also and LOVE the quality!! I have been very happy with all of it and they have a pretty good selection of items also. I have just a couple of items left that I want to get. (Still haven't had a chance to get my pics taken. Sorry)
_____________________________
2008 White Mustang convertible GT SSInserts chrome billet interior accessories (Ready to add to the list!)
I know you originally asked for polished billet or chrome, but you can check out my interior with brushed aluminum by clicking on the camera icon under my avatar pic. I did mix and match a bit (some UPR items that I couldn't find elsewhere at the time), and found it quite easy going the brushed route.
+1 on MGW being the top.
I'll have updated pics up of my interior pretty soon with a review of the Kenwood in-dash DVD player I just installed. This is by far the best interior "appearance" upgrade you can make.
BTW, in the most generic terms, "chrome" is a plating process that yields its shiny surface, while "polished billet" refers to a solid piece of aluminum that is polished to a high luster (also giving it a bright shine, though not as much as chrome). The disadvantage to chrome is that if it is done poorly (and there's LOTS of poor chrome quality out there) it can flake or chip off after some time. I'm sure others can give you a more technical answer.
Best, -j
_____________________________
2006 Mustang GT Premium -Tungsten, IUP w/upgrades, CDC Ducktail, Chin Spoiler, & Deck Lid Panel, Chaser Taillights, Modified lower fascia, SHR Flush Louvers & Fuel Door, JLT II CAI w/Evo-Performance tune, CHE K-brace w/limiters, Roush Strut Brace
Looks like a great website...SS inserts and MGW looks like the winners
08whitestang- Are you a new orleans' saints fan??? from new orleans??? (can't wait to see your pics of your interior) probably going w/ SS & MGW
Philostang- Thanks for the explanation. Interior looks great. Are your pedals from UPR??? I do like the pedals from UPR. They are supposed to fit over your stock rubber. Were they hard to install and how do they feel especially when your shoes are wet?
Did i miss anybody?? If i missed anybody , i will catch you on the next go around.
The pedals are from UPR, fit is great, and they feel very solid. I've had them on for over 20K miles, no problems. This is my daily driver year round (in Chicago), so she's seen plenty of sleet and snow on the pedals w/o issue. Once in a great while I'll feel a slip, but that's because of my error (putting my foot down at a rediculous angle or on the very tip of the pedal...total driver-moron moments). The install wasn't terribly difficult, and yes they install over the stock pedals. This is what gives them great grip even during inclement weather. Thinking about this a bit, I usually wear gym-shoe-type soles, and the few times I've had on dress shoes in the car during the rain I have noticed some slipping.
I've got UPR's mirror knob & bezel kit as well as their heater control knobs (all in brushed aluminum). No issues after 20K miles, and the fit is fantastic. In fact, I had the mirror control knob bezel on without any adhesives for about 5K miles just using a press fit--the fit was that precise. The control knobs need a bit of quick rub down from time to time, but its all aluminum, so there's nothing to lose. I'm not sure what the "careful" is in regards to UPR; I think you can pretty easily see that some of their products are not the best made, so I would just stay away from those.
Still +1 on MGW as the best.
Best, -j
_____________________________
2006 Mustang GT Premium -Tungsten, IUP w/upgrades, CDC Ducktail, Chin Spoiler, & Deck Lid Panel, Chaser Taillights, Modified lower fascia, SHR Flush Louvers & Fuel Door, JLT II CAI w/Evo-Performance tune, CHE K-brace w/limiters, Roush Strut Brace
No love for silverhorseracing in here? Their stuff it top notch too and matches the silver MGW stuff as well. I've got a mix of both companies and they work out well.
_____________________________
Dennis 2007 Tungsten Grey GT - MAC, UPR, MGW, Silverhorse Racing, Scott Drake , Xenon , Spyder aluminum driveshaft w/BMR driveshaft loop, 4.10's, Detroit Truetrac, FRPP axle girdle, full BMR suspension in the works, & embroidered "GT" headrest wraps.
No love for silverhorseracing in here? Their stuff it top notch too and matches the silver MGW stuff as well. I've got a mix of both companies and they work out well.
Printable Version
Pics of Billet Interior - 
NICE PICS!
If i missed anybody 
, i will catch you on the next go around.
