351w swap k member ?

86Capri2GT · 04-08-2008, 05:25 PM

alright im in the process of ordering everything i need to drop a 351w in my 90 lx but i wanted to know if any one is running a tubular k member with the motor and also what headers will work with the motor/k member with out problems.. the k member and headers are pretty much the last things i need before the project is put together so any help would be great! thanks in advance

92civy · 04-08-2008, 08:13 PM

I have an AJE tubular k-member. It's pretty nice. I bought it used. I threw some paint on it and it looked Brand new. It made room for oil pan, and header clearance. Much better than the stocker. I have a set of BBK 1 3/4" LT 351w swap headers and they fit nice with my C4. I also had Mac headers, But the CC was very cheap!!!! The BBK headers are very nice quality too.

cccharleston · 04-09-2008, 09:18 AM

I have a UPR k member and MAC 351 swap long tube headers. Bothe look and preform great.

Paul

86Capri2GT · 04-09-2008, 04:24 PM

thanks for the replies also for the tubular a-arms i wanna go with springs instead of coilovers do i have to get the ones with spring perches on the a arms and the k member?

cccharleston · 04-10-2008, 06:21 PM

Yes. I think the AJE wil allow you to use the stock A-arms of you can buy the tubulars.

Paul