2000 COBRA R BODY KIT
Login  | |
|
2000 COBRA R BODY KIT - 4/7/2008 1:50:37 AM
|
|
|
1999SVTCTT
Posts: 57
Joined: 1/13/2008
Status: offline
|
would a 2000-2002 cobra r body kit fit on a 99 mustang cobra
and one question
why do the rpm on a mustang lower so slow when revd
|
|
|
|
|
|
|
RE: 2000 COBRA R BODY KIT - 4/7/2008 6:48:16 AM
|
|
|
baino
Posts: 1039
Joined: 1/22/2008
Status: offline
|
the kit should fit fine. Not sure what you mean about the rpms, maybe spray some cleaner on your cable where it meets the tb
_____________________________
FOR SALE $15,000
|
|
|
|
|
RE: 2000 COBRA R BODY KIT - 4/7/2008 9:57:03 AM
|
|
|
03_svt_cobra_22
Posts: 194
Joined: 6/30/2007
Status: offline
|
quote:
ORIGINAL: 1999SVTCTT
would a 2000-2002 cobra r body kit fit on a 99 mustang cobra
and one question
why do the rpm on a mustang lower so slow when revd
yes it will. If your talking about a mustang gt than the fly wheel is cast iron vs aluminum in the termi that makes a difference... and +1 on the tb
|
|
|
|
|
RE: 2000 COBRA R BODY KIT - 4/7/2008 7:22:02 PM
|
|
|
Stang9946
Posts: 1135
Joined: 5/5/2005
Status: offline
|
It'll fit. I know someone who has a 99 cobra with the whole kit.
_____________________________
'97 SVT Cobra
C&L RAI, Borla Stingers, Mac H-pipe, 3.73.1, UD Pulleys, 93 Brenspeed Tune, H&R Super Sports, Steeda Tri-Ax, J&M C/C Plates, Ultra Clear Markers, 1" Rear Billet Adapters, Nitto 555 245/45 (F),275/40 (R)
|
|
|
|
|
RE: 2000 COBRA R BODY KIT - 4/13/2008 5:40:39 AM
|
|
|
1999SVTCTT
Posts: 57
Joined: 1/13/2008
Status: offline
|
its a 99 cobra
but i unplugd a vacuum hoes that went from the intake manifold to the valve cover the rpm lowerd much faster but the idle was rough
so then i put it back on
and is it good to power shift with a mustang i had some ppl tell me its a good way to race
i was wondering if it would mess it up
what i mean by powershifting is keeping the throttle wide open when shifting gears
hold the throtle push in clutch and shift then let go clutch good or badd
|
|
|
|
|
RE: 2000 COBRA R BODY KIT - 4/13/2008 1:36:34 PM
|
|
|
03_svt_cobra_22
Posts: 194
Joined: 6/30/2007
Status: offline
|
quote:
ORIGINAL: 1999SVTCTT
its a 99 cobra
but i unplugd a vacuum hoes that went from the intake manifold to the valve cover the rpm lowerd much faster but the idle was rough
so then i put it back on
and is it good to power shift with a mustang i had some ppl tell me its a good way to race
i was wondering if it would mess it up
what i mean by powershifting is keeping the throttle wide open when shifting gears
hold the throtle push in clutch and shift then let go clutch good or badd
powershifting is a effective way to drop a few tenths on the et. just make sure you dont miss a gear while doing it or your tranny wont last very long. I personally dont powershift cause of fear of missing a shift. some people have powershifted for a long time and have had no problems. id say dont do it alot just when you race and "feel" your clutch when your driving
_____________________________
2003 SVT Cobra vert- 12.80 @ 110 1.9 60'''' / bone stock
1988 chevy K1500- 350ci bored .30 over, flat tops, shorty headers, o/r Ypipe, drop in air filter, fuel pressure regulator,...to bad they dont make a eaton for my truck :(
|
|
|
|
|
RE: 2000 COBRA R BODY KIT - 4/13/2008 2:01:37 PM
|
|
|
njdanmustang
Posts: 290
Joined: 11/9/2007
Status: offline
|
power shifting = bad
If you want your tranny to last don't power shift. Missing gears just makes it worse, but the huge change in RPMs when you power shift is what eats ur sh#$ up.
_____________________________
99 flows, bbk intake, mach1 chin, mach 1 grill delete
|
|
|
|
|
Printable Version
