Door Panel

Mustang Forums Mustang Classifieds Photo Gallery Calendars Search Live Chat Contact MF Sponsors
Mustang Recalls Mustang TSB's News Timeslips Timeline Wallpaper Member List Register Login

Door Panel

Printable Version

Mustang Forums >> Ford Mustang Tech >> 2005 - 2008 Mustangs >> 4.0L V6 Specific >> Door Panel

Page: [1]

Message

<< Older Topic Newer Topic >>

Door Panel - 4/6/2008 4:16:45 PM

wildstang 384

Posts: 10
Joined: 1/14/2007
Status: offline

I need to remove my drivers side door panel. Has anyone done this before. HELP!!

Post #: 1

RE: Door Panel - 4/6/2008 4:25:49 PM

bronxbomba63

Posts: 82
Joined: 2/1/2007
Status: online

I believe there are about 6 screws around the door panels that you would have to unscrew to take the panels off. there are an additional 2 (one behind the door handle, one somewhere around the handle around the window controls). these are found after you remove the panels.

(in reply to wildstang 384)

Post #: 2

RE: Door Panel - 4/6/2008 4:27:30 PM

OIIIIO

Posts: 670
Joined: 1/14/2007
From: Maui, HI
Status: offline

http://www.allfordmustangs.com/forums/attachments/2005-mustang-v6-tech/30471d1184795420-2005-mustang-door-panel-removal-door-panel-removal.pdf

_____________________________

Browse My Site!

(in reply to bronxbomba63)

Post #: 3

RE: Door Panel - 4/6/2008 4:37:08 PM

bronxbomba63

Posts: 82
Joined: 2/1/2007
Status: online

there you go.....nice link

(in reply to OIIIIO)

Post #: 4

RE: Door Panel - 4/7/2008 4:06:55 AM

wildstang 384

Posts: 10
Joined: 1/14/2007
Status: offline

Thank you for the info. I am getting a new Left side mirror. I just want to make sure I do it right.

(in reply to OIIIIO)

Post #: 5

RE: Door Panel - 4/7/2008 2:56:11 PM

157db

Posts: 4379
Joined: 5/16/2007
From: NW Arkansas
Status: offline

Straight from Ford:
http://iihs.net/fsm/?dir=441&viewfile=Door%20Trim%20Panel.pdf

Exterior Mirror
http://iihs.net/fsm/?dir=448&viewfile=Exterior%20Mirror.pdf

Exploded View
http://iihs.net/fsm/?dir=448&viewfile=Exterior%20Mirrors%20Exploded%20View.pdf

< Message edited by 157db -- 4/7/2008 2:58:28 PM >

_____________________________

AiRaid CAI
Saleen Short Shifter
F/R GT Sways
GT M/T TakeOff Muffler
Roush Rear Shocks/Springs
Roush Hoodscoop
Roush Window Louvers
SS Eleanor Grill
Pony Emblems
CDC Decklid Panel
CDC Sequentials
Raptor Shift Light
MSD DashHawk

(in reply to wildstang 384)

Post #: 6

RE: Door Panel - 4/7/2008 5:17:39 PM

wildstang 384

Posts: 10
Joined: 1/14/2007
Status: offline

The window rattles when I hit a bump in the road or close the door. I think the car was wrecked before I bought it. I didn't notice these things until about 6 months after I bought it. Does anyone know how to tigten the brackets so it doesn't rattle as much?

(in reply to 157db)

Post #: 7

RE: Door Panel - 4/7/2008 5:21:19 PM

07lane40

Posts: 833
Joined: 7/19/2007
Status: online

i'd say just open 'er up and tighten those bolts...

_____________________________

(in reply to wildstang 384)

Post #: 8

RE: Door Panel - 4/12/2008 8:35:54 AM

157db

Posts: 4379
Joined: 5/16/2007
From: NW Arkansas
Status: offline

DynaMat
DynaMat
after tightening the bolts

(in reply to 07lane40)

Post #: 9

RE: Door Panel - 4/12/2008 1:16:05 PM

wildstang 384

Posts: 10
Joined: 1/14/2007
Status: offline

Dyanmat?

(in reply to 157db)

Post #: 10

RE: Door Panel - 4/12/2008 6:21:01 PM

Devil Wolf

Posts: 528
Joined: 12/15/2007
From: suburbs of Chicago
Status: offline

its sound dampening material.

_____________________________

2007 torch red premium v6 pony package
Mods:
Steeda cai & lcas, 4.10s & t-lok, diablosport 93 tune,Borla AxleBack,interior stuff,louvers,hood struts,plenum cover,3d carbon chin, 10"stripes

next up - nitrous & steeda driveshaft

(in reply to wildstang 384)

Post #: 11

RE: Door Panel - 4/12/2008 6:44:52 PM

NocturnalV6

Posts: 284
Joined: 3/24/2008
Status: offline

aye dynamat is being used big time

_____________________________

Team Nocturnal = American Muscle

(in reply to Devil Wolf)

Post #: 12

RE: Door Panel - 4/25/2008 6:27:40 PM

wildstang 384

Posts: 10
Joined: 1/14/2007
Status: offline

I finally got to get into changing the mirror and checked on all the bolts. They are all tight. The darn window still rattles. I didn't put the Dyanamat. That will soften the sound but it's still going to rattle.

(in reply to NocturnalV6)

Post #: 13

RE: Door Panel - 4/26/2008 8:50:46 AM

157db

Posts: 4379
Joined: 5/16/2007
From: NW Arkansas
Status: offline

quote:

ORIGINAL: wildstang 384

I finally got to get into changing the mirror and checked on all the bolts. They are all tight. The darn window still rattles. I didn't put the Dyanamat. That will soften the sound but it's still going to rattle.

Check the nut on the bottom of the door and the nut
under the red reflector on the door panel for tightness.

Next its time to check the door handle. Sure the noise is
window related or in the door somewhere?

Thumbnail Image

Attachment (1)

_____________________________

AiRaid CAI
Saleen Short Shifter
F/R GT Sways
GT M/T TakeOff Muffler
Roush Rear Shocks/Springs
Roush Hoodscoop
Roush Window Louvers
SS Eleanor Grill
Pony Emblems
CDC Decklid Panel
CDC Sequentials
Raptor Shift Light
MSD DashHawk

(in reply to wildstang 384)

Post #: 14

RE: Door Panel - 4/26/2008 9:17:35 AM

my06shaker

Posts: 135
Joined: 12/8/2007
Status: offline

While you're in there swap out those lame factory speakers for some quality ones and those door handles for the good lookin' Silverhorse handles.

Thumbnail Image

Thumbnail Image

Attachment (2)

_____________________________

People do not seem to realize that their opinion of the world is also a confession of character. —RALPH WALDO EMERSON

(in reply to 157db)

Post #: 15