Need to remove crank pulley-03 Cobra

Printable Version

Mustang Forum >> Ford Mustang Tech >> 4 Cylinder NA and Turbo >> SVO Forum >> Need to remove crank pulley-03 Cobra

Page: [1]

Login Message << Older Topic   Newer Topic >>

Need to remove crank pulley-03 Cobra - 4/3/2008 5:09:07 PM    ecal533   Posts: 15 Joined: 9/14/2006 Status: offline I have to replace the rear 6 rib belt but can't seem to get good info on how to remove the outter 8 rib pulley on my Cobra. It has a 14mm..inverted hex in the front. No bolts that I can see. I had a huge 14mm allen head socket tha I put in it and tried to turn it but no dice. IS this thing pressed on too? Really need help. Post #: 1

RE: Need to remove crank pulley-03 Cobra - 4/3/2008 5:25:06 PM    sleeper_inc Posts: 7928 Joined: 9/1/2006 From: Regina Beach, Sask Status: offline Sorry this is the 2.3 turbo section. The special 84-86 SVO not SVT. Check the specialty section _____________________________ Project No Hands 2.3 Tech Articles Waiting for a real race.. (in reply to ecal533) Post #: 2

Forum Rules & FAQ Today's Posts Most Active Topics RSS Feeds Make A Donation Mustangs: Classic Mustang Mustang II Fox Body Mustang sn95 Mustang New Edge Mustang s197 Mustang Mustang Clubs 2007 GT500 Mustang 2009 Mustang Ford Mustang Prices

Featured Sponsors

Advertising Info

Top 10 Posters
pro50sc 17365 nanaki 14509 dan04cobra 14347 88bluegt 14311 ride of the 13247 addermk2 13232 hotrods_n_bo 13184 2000gt4.6 12439 mustangman02 11576 1slo85 11492

New Vendors
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
4walls
BrandMotion
AMSOIL - Performance Oil Technology
Brenspeed's Saleen Superchargers