will this work/how much hp
 

im looking for roughly 280hp (hopefully)

gt40 heads and intake (possibly ported)
crane 444221 cam.. 216/220 duration @ .050 and .533/.544 lift

would that setup work or what would i have to do..i dont know much about it
would i need diff. rocker arms or anything like that?

my car is a stock 88 lx..speed density
thanks in advance

RE: will this work/how much hp
 

lsa on the cam?

so far looks like itll work, but you wont see 280, prolly more like 250-270 just going off of what i know

diff valve springs/locks/retainers atleast, RRs would be a good idea along w. pushrods

get the heads cut for dual valve springs and screw in studs/guideplates if you wanna run RRs

RE: will this work/how much hp
 

lsa is 112 andaccording to that one chart this cam should work i was just curious what i all needed for it

RE: will this work/how much hp
 

112 lsa will not work with sd .114 lsa os what you are looking for .

RE: will this work/how much hp
 

he may get away with it, based on the lower lift at 50 numbers, i am not sure though, havent looked into that one... but hell id try it

RE: will this work/how much hp
 

well..this chart says it should be fine

http://www.mustangforums.com/upfiles...2D4E1C1795.gif
i dunno how to post pics lets see if that works
nope

RE: will this work/how much hp
 

you can give it a try the most it would do is not idle well.

RE: will this work/how much hp
 

looking at the low duration and 112lsa if it were me and i wanted it id try it, but i cant guarentee itll run good like i can a few other SD cams

get that cam, worse comes to worse if it doesnt idle good you pm me, i tell you some ways to fix it that most ppl do not know about.

RE: will this work/how much hp
 

sultan68 i would listen to dime he has a very good understanding of the sd cars .

RE: will this work/how much hp
 

im not really "set" on that cam
i wouldn't be heartbroken if i had to go with a different one
but if i go with that one.. ill let you guys know how it works out