did anyone remove the pony logos from the side of there car?? if so is there holes behind it??? and how hard was the adhesive behind it to get off the car if it leaves any behind??? any help would be most appreciated
Posts: 672
Joined: 1/14/2007 From: Maui, HI Status: offline
quote:
ORIGINAL: 1badV6
did anyone remove the pony logos from the side of there car?? if so is there holes behind it??? and how hard was the adhesive behind it to get off the car if it leaves any behind??? any help would be most appreciated
There are 2 mounting holes on each side. To remove, one of the tricks is to use a heat gun or hair dryer, quite aparingly... not too close. Then use a fishing line to slip behind the badges. They will come off easily. To remove tape residue, just use WD40 or goo gone.
< Message edited by OIIIIO -- 3/30/2008 8:13:48 PM >
Printable Version
pony tri bar logo removal - 
