Need help with decisions

Printable Version

Mustang >> Vendors & Sponsors >> StangSuspension.com >> Need help with decisions

Page: [1]

Login Message << Older Topic   Newer Topic >>

Need help with decisions - 3/25/2008 5:27:52 PM    RC02GT   Posts: 105 Joined: 3/5/2007 Status: offline I want to lower my 02 GT, 72,000 miles. not to low but low enough that its noticable. I like h&r products, maybe the super sports, or just sport spring. Also like steeda and eibach but the steeda's arent low enough, so maybe eibach pro kit. Also I think im going to get tokico s/s, and last MM c/c plates, I was looking around your site, I like the writeup with spring rates. What do you recommend I get, I dont go to the track so I do not need drag springs or anything like that, I just want a lower stance, good ride quality, good handling. I think im set on the s/s and c/c plates but not the springs, h&r's or eibach pro kit, Thanks. Post #: 1

RE: Need help with decisions - 3/25/2008 5:31:54 PM    RC02GT   Posts: 105 Joined: 3/5/2007 Status: offline O yea and Im selling the Gt to get a cobra or mach 1 but just want it lowered for now, can I get away with just springs that go no lower than 1.5" and thats it (in reply to RC02GT) Post #: 2

RE: Need help with decisions - 3/25/2008 10:08:14 PM    STANGSUSPENSION   Posts: 459 Joined: 5/2/2004 Status: offline I would stick with either the H&R Sport Springs or Eibach Pro-Kits... for several reasons. They lower a noticeable amount, without being too low. They have a moderate, progressive spring rating. Good for performance and ride comfort. They will not be too stiff for the Tokico HP's you plan on purchasing, they will be a nice match. The H&R Super Sports may be a bit too stiff for what you're looking for. Sincerely, _____________________________ Josh Sadowsky http://www.stangsuspension.com Mustang suspension parts and performance. (in reply to RC02GT) Post #: 3

RE: Need help with decisions - 3/27/2008 9:02:28 PM    RC02GT   Posts: 105 Joined: 3/5/2007 Status: offline which do you think will be lower, h&r sport spring or eibach pro kit. (in reply to STANGSUSPENSION) Post #: 4

RE: Need help with decisions - 3/28/2008 11:59:22 AM    STANGSUSPENSION   Posts: 459 Joined: 5/2/2004 Status: offline They both lower a very similar amount. On paper, the H&R sports lower slightly more. Sincerely, _____________________________ Josh Sadowsky http://www.stangsuspension.com Mustang suspension parts and performance. (in reply to RC02GT) Post #: 5

RE: Need help with decisions - 3/29/2008 10:02:48 AM    RC02GT   Posts: 105 Joined: 3/5/2007 Status: offline is there anything else i need to buy, like little stuff, isolators, bushings...? (in reply to STANGSUSPENSION) Post #: 6

RE: Need help with decisions - 3/29/2008 11:09:51 AM    STANGSUSPENSION   Posts: 459 Joined: 5/2/2004 Status: offline Bushings will just increase performance that much more. Easy to install bushings when installing your springs: front swaybar bushings front endlinks offset rack bushings spring isolators - will lift the suspension 1/4 of an inch higher than oem isolators. If you want to lower the maximum amount, use oem isolators. Sincerely, _____________________________ Josh Sadowsky http://www.stangsuspension.com Mustang suspension parts and performance. (in reply to RC02GT) Post #: 7

Forum Rules & FAQ Today's Posts Most Active Topics RSS Feeds Make A Donation Mustangs: Classic Mustang Mustang II Fox Body Mustang sn95 Mustang New Edge Mustang s197 Mustang Mustang Clubs 2007 GT500 Mustang 2009 Mustang Ford Mustang Prices

Featured Sponsors

Advertising Info

Ride of the Month
May 2008
1989 351W Hatch

Top 10 Posters
pro50sc 17383 nanaki 14519 dan04cobra 14350 88bluegt 14311 ride of the 13259 addermk2 13237 hotrods_n_bo 13184 2000gt4.6 12442 mustangman02 11578 1slo85 11494

New Vendors
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
4walls
BrandMotion
AMSOIL - Performance Oil Technology
Brenspeed's Saleen Superchargers