Yes its very easy. I did mine last night. First you need to remove the bolts in the trunk with a 10mm socket. Then you need to heat the top of the spoiler up where the 3m tape is and wiggle it off. Then you just screw the new spoiler on and it has 3m tape around the border. The hardest part is to get the old spoiler off.
_____________________________
C&L Cold Air Intake Brenspeed 93 Tune Pypes Muffler Deletes and X Pipe. MRT Rear Window Louver/ Side Louvers. GT500 Spoiler 20 % Tint
Posts: 876
Joined: 8/17/2006 From: Virginia Status: offline
+1. The old 3M is a chore, but be patient with it. Fitment is great with the new spoiler, just be super careful when lining it up as the 3M sticks like a mother.
I placed the new spoiler on the trunk, and barely attached the nuts to the screws to ensure that I was in the correct spot. I then removed the film from the back side of the spoiler and set the tape in place. Afterwards, I removed the remaining film. Placement is everything. Good luck!
Printable Version
stock 06 pp spoiler to gt500 spoiler - 
