GT front and rear swaybars - good price or...?????
Login  | |
|
|
|
|
|
|
|
RE: GT front and rear swaybars - good price or...????? - 3/10/2008 4:13:44 PM
|
|
|
themac5150
Posts: 418
Joined: 7/14/2007
Status: offline
|
Sounds like a fair deal. Costs around $90 rear, and $50 front from v6mustangstuff. You didn't mention the bolts and nuts for the rear. Are those included? If not, you'll need to buy them before you get started. You can reuse the front hardware, but if your pony didn't come with a rear, it doesn't have the 6 bolts/lock nuts you'll need to install it.
_____________________________
2007, Ford all weather floormats
|
|
|
|
RE: GT front and rear swaybars - good price or...????? - 3/10/2008 4:15:01 PM
|
|
|
ccdguy
Posts: 42
Joined: 9/2/2007
Status: offline
|
Thanks Dan... I figured that it wasn't too bad. Got them from Diversified Marketing (seller was newtakeoff.com). I just checked the newtakeoff.com website. If I bought it directly on the web from them, the front and rear sway bar plus shipping would have ben like 220 or so.... So I guess that was not too bad. I wish I could pick it up them... Man... you find nice stuff on Ebay but everyone kills ya' on the shipping... That's how they make their money... I guess.
As far as the install time.. Thanks for the info. I will keep that in mind while finding a place to go to... Much appreciated!
_____________________________
2005 Mustang V6 Auto
Wind Veil Blue
AFE Magnum Force Stage 1 CAI
Ninosport Duals / GT mufflers
Brenspeed 93 Tune
3 Gauge "A" pillar pod (A/F, Oil Presure, Vacuum)
|
|
|
|
|
RE: GT front and rear swaybars - good price or...????? - 3/10/2008 4:17:11 PM
|
|
|
ccdguy
Posts: 42
Joined: 9/2/2007
Status: offline
|
Hey Mac...
Yeah, you're right.. I will have to buy the bolts etc, for the rear, as I do not have a swaybar there right now.. Wish I had a list of things to get from the local steal-ership. I'll have to search around for the list of parts that I will need. Thanks man !
_____________________________
2005 Mustang V6 Auto
Wind Veil Blue
AFE Magnum Force Stage 1 CAI
Ninosport Duals / GT mufflers
Brenspeed 93 Tune
3 Gauge "A" pillar pod (A/F, Oil Presure, Vacuum)
|
|
|
|
|
RE: GT front and rear swaybars - good price or...????? - 3/10/2008 4:18:14 PM
|
|
|
themac5150
Posts: 418
Joined: 7/14/2007
Status: offline
|
quote:
ORIGINAL: danbevsv6rumbler
I got a set about 2 months ago for $85  , then again the seller wasn't far from where I lived... so I saved money picking it up myself.
Shipping seems a little steep... I'd say the actual price of the set was good.
To be honest, the rear should be a 15-25 minute job for the typical wrencher... even i did it in 20 minutes. the front might take about twice as long. I haven't done the front yet though, so don't quote me on that lol.
The front was easier for me. My FRPP kit didn't come with the stock style captive bolts for the brackets on the axle. It was a challenge holding the lock nuts with an open end wrench through the tiny opening at the bottom. The front was just a straight up replacement.
< Message edited by themac5150 -- 3/10/2008 4:20:31 PM >
_____________________________
2007, Ford all weather floormats
|
|
|
|
|
RE: GT front and rear swaybars - good price or...????? - 3/10/2008 6:05:16 PM
|
|
|
4LITER6
Posts: 440
Joined: 11/19/2006
Status: offline
|
quote:
ORIGINAL: ccdguy
Hey Mac...
Yeah, you're right.. I will have to buy the bolts etc, for the rear, as I do not have a swaybar there right now.. Wish I had a list of things to get from the local steal-ership. I'll have to search around for the list of parts that I will need. Thanks man !
Here are some part#s..............these were the parts I bought.....
There is a line-------------------below someone posted numbers that were changed...
But, I am sure you will get what you need with these part#'s.....
Rear Sways…
upper link bolt (2) w708737*s439
upper link nuts (2) w711029*s900 (These were not available at Ford, ½ nuts and washers) Ford won’t carry extremely common nut and bolts, this is what I was told?, went to Home Depot…
bracket nuts (4) w520213*s440
bracket bolts snap in style w707007*s439 (new #)
Front Sways…
Just swap out bar, use existing nut and bolts…
------------------------------------------------------------------------------
Just went thru the same issues with finding parts.
For the rear:
Part #W711029-S900 Clip Nut is now listed at Ford as #W520214-S440 it is $1.95 ea. You only need 2 but you have to buy 4 in the package.
#W707007-S439 is listed as #W711368-S439 also (Clip Stud, 4 required)
The other parts are all valid numbers. When I ordered all the bolts it came to $24
_____________________________
06 Vert, Vista Blue Prem. X-Charger, BMR: LCA''s & Re-Lo Brkts., UCA & Mt., GT Take Off''s: Body Kit, Dual GT''s/X-Pipe, 8.8 Diff. 373''s/t-lok, Hurst Shifter, Shorty JBA''s, Saleen: HID''s, 5 Spoke and Watts Link, 3D Carbon: Ctr Fogs, Alum DS...
|
|
|
|
|
RE: GT front and rear swaybars - good price or...????? - 3/11/2008 6:46:55 AM
|
|
|
157db
Posts: 4827
Joined: 5/16/2007
From: NW Arkansas
Status: offline
|
Ripped. LOL
Seems kinda steep and that shipping charge is out the door.
I got mine off eBay for $50 shipped to my door.
Front and rear GT sways. New take-off front end links
and rear LCAs to boot.
Thumbnail Image
You will need items 1, 2, 3, and 6. Item 2 has been changed to a new part #. 
$44 for the hardware from the Stealership. They didnt give me the total until
the items were ordered and I went to pick them up. 
Thumbnail Image
 Attachment (2)
< Message edited by 157db -- 3/11/2008 6:58:42 AM >
_____________________________
AiRaid CAI
Saleen Short Shifter
F/R GT Sways
GT M/T TakeOff Muffler
Roush Rear Shocks/Springs
Roush Hoodscoop
Roush Window Louvers
SS Eleanor Grill
Pony Emblems
CDC Decklid Panel
CDC Sequentials
Raptor Shift Light
MSD DashHawk
|
|
|
|
|
Printable Version
