Hey everybody.
I finally got around to make an account after browsing around on the forum and realizing how helpfull this place is! You guys are great!

here is my question:
I would like to install a ZEX EFI DRY NITROUS system in my 2008 4.0 and i am a bit confused on how to install the regulator hose to the Fuel pressure regulator, as well as the intake hose from the box. If anybody could help me out with some pictures or something that would be great!

thanks!

ORIGINAL: CommanderCOOL

Hey everybody.
I finally got around to make an account after browsing around on the forum and realizing how helpfull this place is! You guys are great!

here is my question:
I would like to install a ZEX EFI DRY NITROUS system in my 2008 4.0 and i am a bit confused on how to install the regulator hose to the Fuel pressure regulator, as well as the intake hose from the box. If anybody could help me out with some pictures or something that would be great!

thanks!



Your mustang has a returnless fuel system... installing a dry n20 is a bit tricky... i suggest you got with the wet system that's designed for your S197 Mustang... The Zex Wet kit for the GT works just fine on the V6....

after researching the GT wet kit from Zex, that looks like a MUCH easier install that i can do.

This forum never ceases to amaze me with its good advice! thanks a lot.

Do you suggest any aftermarket parts to go along with this nitrous kit? i had an idea for in car nitrous pressure gauge and an air/fuel ratio gauge. good idea?


thanks for all of your help!