99 GT vert

i have been noticing that there have been alot of people posting that they have a miss at higher rpms and it always seems it happens right after they wash down there engine bays

a few tips that i have gathered for washing it down with out hurting anything are

1. cover up the Coil On Plug's with a rag
2. cover up the altenator with a plastic bag or something similar
3. cover up the air filter with a plasic bag or something similar
4. cover up the battery wit some sort of plastic
5. cover up the fuse box with a plastic bag or something similar
6. after covering up these componants take some degreaser and spray down the whole engine
7.once you have the degreaser on take a finger nail brush or something like that and scrub the entire area
8. when running water over the engine bay make sure the engine is not hot
9. use as little water as possible to prevent water from getting were it can hurt something
10. top it with an engine detailer (i like to use CD2)

here is picture i have circled of the areas that need to be covered in yellow



if anyone has any other tips feel free to share them and i can add them to this
(pic thanks to sitnlopro's gallery pics)

__________________
SLP LM2s
MAC O/R H
Professional Products 75mm Throttle Body
Trick Flow Intake Manifold
http://www.obsessivedetail.com/

RIP Zach Gent 1/27/08

ZW99GT

That looks really good man! Thanks for the advice! Nothings worse than a dirty engine bay

__________________




If bottles are for babies, why does everyone else cry about it?

fiad06

I found what im going to do tommorow. Whats a COP's?

__________________

99 GT vert

Coil over plugs

__________________
SLP LM2s
MAC O/R H
Professional Products 75mm Throttle Body
Trick Flow Intake Manifold
http://www.obsessivedetail.com/

RIP Zach Gent 1/27/08

ZW99GT

Coil on Plug. It's the little black cylinder that sits on the top of the spark plugs.

__________________




If bottles are for babies, why does everyone else cry about it?

Brute03

i gave up a long time ago on trying to clean my engine bay... i always have to spend the rest of the night trying to blow water out of the plug wells [:@]

__________________

2003 True Blue GT 5spd
-o/r x-pipe
-Flowmaster cat back
-Accel Super Coils

Home-made mil's

99 GT vert

that is why i always stuff rags all around the plug area and use very little water

__________________
SLP LM2s
MAC O/R H
Professional Products 75mm Throttle Body
Trick Flow Intake Manifold
http://www.obsessivedetail.com/

RIP Zach Gent 1/27/08

califas_1987

Alleluyah! Nice post. What kind of degreeser do you recomend? Last time I used anything was 10 years ago. It wasthat Gunk stuff w/ a pink foam and it made my white paint pink.

__________________


Mods: All FreeMods I can Find, and some Photoshoped Dark Charcoal Bullits

99 GT vert

i just used simple green in a spray bottle, or just any dregreaser will work i just would not use a real stong one it may hurt something

__________________
SLP LM2s
MAC O/R H
Professional Products 75mm Throttle Body
Trick Flow Intake Manifold
http://www.obsessivedetail.com/

RIP Zach Gent 1/27/08

96GT_PSL

awsome post! now i can givemy engine bay its much needed make over. [&:]

__________________
1996 Mustang GT.

King Cobra Clutch, Flowmaster Mufflers, 4.10 Gears.

way more to come.