1964 1/2 289 2bbl (autolite 2100) with holley headers and flowmaster 40s new: Quick Performance Racing 9" rear, Moser axles, 3.5:1 trac loc from FRPP and T5. CSRP disc brakes front and FRPP discs back. New wheels and tyres
Posts: 3506
Joined: 5/4/2005 From: Western MD Status: offline
How much for the setup? I'm currently building up an assembly using some used parts and some new parts since Im on a budget... Lots of time, not so much with the money
I got the rear housing and axles, with all the bearings and seals already pressed and ready to bolt on for $970. I got the 3rd member for just under $1400. It is the nodular case with 3.75 gears and the tru trac posi unit. I got a little bit of cash tied up in the rear. I also bought all new leafs from Maier racing, new shackles, new spring plates from Maier racing, rear adjustable sway bar, edelbrock shocks, new comp. eng. ubolts, and Bear disc brakes with the built in parking brakes. I am putting in an adjustable pan hard bar from Maier racing too because I want to and it looks cool. It should improve the handling out of corners, at least a little.
some setup :-) baddog671: I'm getting a complete 9" rearend, trac loc with disc brakes for under 2000$. let me know if interested and I'll give you more details via PM. I don't have the setup, I guess I'll have all parts in a months time, so I cannot say anything about it
_____________________________
1964 1/2 289 2bbl (autolite 2100) with holley headers and flowmaster 40s new: Quick Performance Racing 9" rear, Moser axles, 3.5:1 trac loc from FRPP and T5. CSRP disc brakes front and FRPP discs back. New wheels and tyres
Printable Version
Got the rear end assembled - 
