nbd13

Hey everyone,

I am ordering a bunch of parts this weekend and wanted to lower the car as well. What brand are people going with? Any regrets? Suggestions or so on? Let me know a good choice guys. Not sure if it matters, but '06 GT convertible.

Thanks,

Nick

ink003

eibach pro kit, for me - i love it! and the pro kit is probably the most universally recommended set of springs on this board, though there are certainly other viable options as well.

__________________

- BBK CAI & Brenspeed 93 tune, Borla exhaust, 5.0 Pro shifter
- D-Specs, Pro-Kit, crossmember, rear sway, k-member, lcas, brackets, phb & brace
- Mustang got keyed crew!

06VistaBlueGT

I only lowered the rear to level it, I used Roush springs. I like them a lot

__________________
JLT2|BMR Sway Delete|BMR LCA/Relo|Tokico|Roush Rear Springs|Cherry Bombs (no over axle pipes)|O/R X|M&H DR's|Line locks|Bama 93 Tunes|Raptor Shift Light|CHE TQ Limiters|Al. DS|BMR Saftey Loop|4.10's|GT500 Spoiler|MGW Shifter

oh6ponygirl

I just got done installing the Steeda sports and for some reason it seems to have lowered it much more than I expected in the rear. I am currently having a slight bumpstop rub issue. Mine is a vert also. If I can't find a sensible solution, I may try the Roushes on the rear and see what happens.....

__________________
2006 GT Vert, Black/Red Interior, C/S Front Fascia, FRPP Axlebacks, Spohn PHB, Steeda Struts/Shocks/Strut mounts/PHB brace, Steeda front springs/Roush rears, Clear Corners, Custom Vert Boot, Factory Polished 18 inch bullitts

Black_06GTStang

eibach pro kit for me as well. no issues since install.

__________________

06 GT
Vortech H.O.
440 rwhp/389 rwtq
4.10's, Hurst STS, LCA's/UCA, Borla Cat Back it goes on and on....

Black05StangGT

I used the Tein S-Tech springs, but I'm not sure if they work with the vert or not...they lowered my car to what I consider the perfect height...

__________________

Custom Paint by Scott Jenkins
Tuning by MPH

Margarita Girl

I have the Roush coil springs with Koni dampers.

__________________

PiggySmallz

BMR springs with tokico d specs. 1.25 front and 1.75 rear, no bumpstop issues

__________________
Stangpede NYC

hogpowr

I went with the steeda ultralites, very happy.No matter which you choose,just make sure the front sway bar links are very tight.

Here is a very good read, if you haven't already seen it!

http://www.mustangforums.com/m_3070963/tm.htm

__________________
06 Mustang GT Vert,5 speed stick, Premium, Torch Red, 18" Polished Bullits, PioneerProfileInfinityMTX sound system, Tuneable Induction by DeMolet, SCTx2 93oct by Brenspeed, Offroad X, Steeda Ultra-Lites, Shifted by Hurst, Red Top Optima

d4rb

FRPP (Ford Racing) K springs. No complaints whatsoever.

__________________
My Cardomain Page
FRPP Stingers, FRPP 4.10s, FRPP K Springs, Hurst STS, C&L Street CAI, Brenspeed 93 Tune, Steeda UDPs