Was up to everyone...everyone can call me Marbo...dats' my nicname....but i'm new to this sight and i have just became interesting in making my care faster with better performance.....but i don't have little to work with... I have a Green 1996 Ford Mustang 3.5l with 6 cylinders....my motor has headers but it seems my car still pulls....its take off is poo... my parents 2004 ford taraus has more take off so wht's my problem....a year ago my head gaskets blowed and i had some work did to my motor but i doubt that's a problem..the mechanic was certified and i've had no problems wht so ever with my motor but what else do i need....i need help...someone help me start with the basics.......
Welcome to MF! the basic bolt ons everyone normally starts with are cold air intake and exhaust. those are your basic mods you will want to start with. next i would put new gears in it. since mine is a 5spd 3.73 work perfect for my daily driving and track times. correct me if im wrong but 4.10 to 4.11's in an automatic are equivalent to 3.73's in a 5spd. it just depends on how you want your gas milage. put 4.10's in your car and it will feel like you gained around 30-50 hp. it was a night and day difference for mine. next you could start doing lil mods like underdrive pullies which free up some hp. then you will want to start getting into the bigger mods like Upper and Lower intake and throttle body. its just never ending if you have the money to spend. i got my upper and lower intake for 70$ at the junk yard and looked online at the price it would have normally cost and it was 400$ so you can find good prices all over the place. and by the way, you have found the #1 mustang forum site on the internet. If you ever have any questions, or any tips, post them in the right section and there are hundreds of people that would love to help you out. everyone on this site will do there best and share every ounce of knowledge they have to help you tighten a bolt or build a motor. good luck with your mustang and again welcome to MF! we are glad to have you here.
Printable Version
My Car and I - 
I have a Green 1996 Ford Mustang 3.5l with 6 cylinders....my motor has headers but it seems my car still pulls....its take off is poo...
my parents 2004 ford taraus has more take off
so wht's my problem....a year ago my head gaskets blowed and i had some work did to my motor but i doubt that's a problem..the mechanic was certified and i've had no problems wht so ever with my motor but what else do i need....i need help...someone help me start with the basics.......
1994 Mustang GT , 5spd, GT40 intake,Headers,CAI,U/D pulleys,Magnaflow H-Pipe,Magnaflow exhaust,Subframe connectors,3.73's, Pro 5.0, BFG Radials, ZEX Wet kit. 
