View Full Version : 315's/35/17


v8 all the way!
01-26-2008, 10:21 AM
Okay i am sure this is asked a lot but can i fit this set up on the rear of my car. i have an sn95 so please help me.

also do i have to roll the fender and if so could you post how?

Will i have to turn the shock in the back upside down?

again thanks!

4mach1
01-26-2008, 08:22 PM
I put 315/35/17s on mine and it is lowered about 1-1.5" and i had no problems at all.

AdderMk2
01-28-2008, 12:30 PM
ive got eibach sportline springs, and 315's out back... you need to roll the inner fender pinch weld at the rear of the tire, or it will rub

DTK
01-28-2008, 01:49 PM
ORIGINAL: v8 all the way!

Okay i am sure this is asked a lot but can i fit this set up on the rear of my car. i have an sn95 so please help me.

also do i have to roll the fender and if so could you post how?

Will i have to turn the shock in the back upside down?

again thanks!


I think you are referring to the quad shock?
I have heard of a few people swapping the passenger side quad to the drivers side and vice versa to avoid contact.

If you upgrade to aftermarket lower control arms you can probably take off the quads altogether.

If your car is dropped below 1.5" you may have rubbing issues.

315's look deadly in the back.............I guess you already know that.hence the post!

v8 all the way!
01-30-2008, 12:06 PM
Sweet well thanks guys. I think 315's will look sick in the rear. how do you properly roll the inner fender pinch weld.? any right of wrong way to do this?

DTK
01-30-2008, 02:28 PM
This is probably the best way to do it yourself.

http://www.rollyourfender.com/

There are other techniques..........baseball bats, cutting slats and bending the metal back, etc.......but if not careful you could cause damage.
You could also get it done at a body shop for $$$ too.

pnicholson
01-30-2008, 02:52 PM
Hey there,

315's/35/17s on the back, 17 x 10.5" wheels, Eibach Pro-Kit - no rubbing. Same setup on the car in the background - also no rubbing.

http://i222.photobucket.com/albums/dd128/rstangsoc/Mach1/DSCN2188.jpg

Hope this helps some

Page

txmustang6933
02-04-2008, 04:44 PM
I never had to roll my fenders and i have 315/35/17s. the nitto 555r and they hook great. also dropped 1.5"
http://a842.ac-images.myspacecdn.com/images01/112/l_b3ebf3947d080effd0c280e9bffad931.jpg (http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=23048066&a lbumID=1179795&imageID=23191157)

Obsequious1
02-13-2008, 07:20 PM
I also have 315/35/17's on my 03 gt. no problems with rubbing.

local://upfiles/90643/5B67A3AC4EB44F6797044BE34DC2ABBA.jpg