How to use stock subs in a d3 or aftermarket headunit

Mustang Forums Mustang Classifieds Photo Gallery Calendars Search Live Chat Contact MF Sponsors
Mustang Recalls Mustang TSB's News Timeslips Timeline Wallpaper Member List Register Login

How to use stock subs in a d3 or aftermarket headunit

Printable Version

Mustang Forums >> Ford Mustang Tech >> Audio/Visual Electronics >> How to use stock subs in a d3 or aftermarket headunit

Page: [1]

Message

<< Older Topic Newer Topic >>

How to use stock subs in a d3 or aftermarket headunit - 1/24/2008 5:38:23 PM

yomofoitzjay

Posts: 7049
Joined: 8/30/2006
From: The Garden State
Status: offline

Hey i installed tha d3 gps today, the problem is that the front 2 door subs don't work, how would i go about to get them working.

_____________________________

Post #: 1

RE: How to use stock subs in a d3 or aftermarket headunit - 1/25/2008 8:36:55 AM

ttocs

Posts: 4327
Joined: 2/27/2006
Status: offline

the rear subs DO work? Most of the time to turn the subs on all you need to do is connect the remote turn on(blue/white) of the new deck to the amp turn of in the stock wiring(blue/white).

page 2 of my cardomain page shows integration of a deck into a 94 gt. It does not have to be as hard as I made it but I tweeked it with some passive x-overs and was suprised how good the stock system could sound.

_____________________________

http://www.cardomain.com/ride/2395420

(in reply to yomofoitzjay)

Post #: 2