|
zmetalmilitia -> Looking at 17X8, 17X10. Will they fit? (1/24/2008 8:41:28 AM)
|
I am looking at 17X8 wheels for the front and 17X10 for the back. I do not have access to the wheels, as they are on order, being made. (they haven't started building yet) I have a 67 fastback, with TCP Upper and Lower control arms. The issue of backspaing on the front is the upper control arm. I measured the backspacing of the car, and I have 5" from rotor face to Upper control arm. So I am assuming I need to go 4.5" of backspacing to clear the UCA with the tire mounted on the rim. Does this sound right? I don't want the tire protruding out of the fender, as this will cause problems. I want the wheels to be under the car. For the rear, 17X10's should fit with less of a problem, but the backspacing has to be right on there too. I will measure the rear tonight. Any input would be helpful. Does anyone else have any experience with this setup or wheel sizes? Thanks!
|
|
|
|