Boozshey

I bought the dash kit and wire harness from Circuit City.
Not sure of the part number, just ask them for it, they will know.

THIS IS A WITHOUT SHAKER INSTALL!!!
For a shaker install goto http://www.mustangforums.com/m_4469990/tm.htm

Tools:
Solder Iron
Heat gun/Hair Dryer
Razor
Philips Screwdriver
Small Flat Dead Screwdriver (smaller the better)
Pliers
Wire Cutters
Wire Strippers

Materials:
Wire Coat Hanger
Solder
Heat Shrink Tubing
Electric Tape
Wire Coat Hanger
Zip Ties

Sorry no peanut butter in this one...

















THE NEXT 2 ARE THE BYPASS STEPS!!!



Use a small small flat head screwdriver on the side of this and lift the little flap to pull out the wire...




















































Don't forget to hook up the wires to the center panel...

__________________

mygt500

Badass and thanks for the write-up....it is dizzing to see how many wires are involved but you make it appear simple! J

__________________

2006 Mustang GT with Cervinis Kit
Whipple Crew
H.O. S/C 465 RWHP and 440RWTQ

Full Throttle

STICKY!!!!
[sm=groupwave.gif]

__________________
Black 2005 Mustang V6 Manual
mods: 25% Tint, Sequential Tail Lights, GT500 Pedal Covers, Pony Armrest Cover, SHR louvers, CDC Chin Spoiler, Smoked Turn Signals, Woodview Dash Kit, FRPP Dual Exhaust, Black 18" Torq Thrusts, PowerSlot Rotors

Boozshey

Yeah tons of wires, but not so bad...

__________________

howarmat

What about the backup signal wire

__________________
~Matt

"Shadow" 2005 Black GT Stick 1 of 368
its not stock

mlkzoodomsl

Boozshey

Didn't install a camera so no need... When I get around to that (in a year or so) I will add to it...

__________________

howarmat

I didnt wire the reverse signal eiher for the Z1, i was to lazy to find the wire and didnt think that the navigation really needed to know that i was going 25 feet in reverse

__________________
~Matt

"Shadow" 2005 Black GT Stick 1 of 368
its not stock

mlkzoodomsl

Argonaut

Wow that is an impressive write-up. How-Tos like this are my favorite part of the forum. Mucho thanks. I can only hope the moderators see fit to make this a sticky.

__________________
07 Vista Blue GT 5spd, BBK CAI, Brenspeed, Raptor, MGW Shifter, 4.10s, Violators, Cervini's Grill, Eibach Pro, D-Specs, Spohn adj PHB & UCA, J&M Camber Plates

Boozshey

Glad you enjoyed it. Don't worry, I usually solicit the moderators to stickies...

__________________

blueherd02gt

Don't you need a part from radio shack to knock the 12v AVIC-D3 preamp feed down to 5v? If you have a shacker system

__________________
Whipple Crew Member


468whp 463 lb/ft tq
2007 Black premium GT
BMC member #07208