Installing pinned lettering on trunk lid

Printable Version

Mustang Forum >> Ford Mustang Tech >> Detailing >> Installing pinned lettering on trunk lid

Page: [1]

Login Message << Older Topic   Newer Topic >>

Installing pinned lettering on trunk lid - 1/18/2008 12:10:14 AM    deewaan1 Posts: 3 Joined: 12/29/2007 Status: offline Hey!  I'm looking for some tips on installing pinned lettering on the trunk lid of my '05 GT.  I don't want to cut off the pins and use 3M tape for the install.  I prefer the flush to the paint look in contrast to the raised from the paint finished look when using 3M tape.  The way I was going to do it was:  Make a template, drill the holes, clean the holes with rust inhibiting acid, touch up the bare metal with POR 15 rust proof marine paint and then use some silicone on the pins and insert them.  Any experts out there know of a better way? < Message edited by deewaan1 -- 1/21/2008 11:05:08 PM > Post #: 1

Forum Rules & FAQ Today's Posts Most Active Topics RSS Feeds Make A Donation Mustangs: Classic Mustang Mustang II Fox Body Mustang sn95 Mustang New Edge Mustang s197 Mustang Mustang Clubs 2007 GT500 Mustang 2009 Mustang Ford Mustang Prices

Featured Sponsors

Advertising Info

Top 10 Posters
pro50sc 17921 nanaki 14685 88bluegt 14536 dan04cobra 14532 addermk2 13997 ride of the 13714 hotrods_n_bo 13328 2000gt4.6 12516 mustangman02 11993 1slo85 11744

New Vendors
Extreme Dimension
BMR Fabrication
Year One
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
BrandMotion