View Full Version : Certication label on driver door


eekman
12-31-2007, 12:08 PM
Just purchased a 94 convertible and had no certication label on door.Need GVW rating, GR Axle weight rating front and rear,and tire pressure front and rear. Can't insure without information.Thanks in advance. Must be from a 94 convertible.

silversol81
01-06-2008, 02:25 PM
Just use the VIN

eekman
01-06-2008, 04:08 PM
Imported into Canada,VIN is not enough.

silversol81
01-06-2008, 06:39 PM
check the owners manual if there is one. you should be able to find this info online.

eekman
01-06-2008, 07:38 PM
Tried online, tried Ford, No manual with car.Hoping someone with a 94 convertible could tell me what is on their door.

Thanks for an answer.

Chuckles_5.0
01-19-2008, 12:18 PM
The tire pressure should be on the tire itself...usually its max 35psi... I've never heard different on street tires.

on the others stuff I can't help...the info has got to be online somewhere...

ryan1994mustang
01-19-2008, 01:04 PM
is if a gt or a v6? if it is a 94 gt convertible then i can just copy what is on my sticker. if it is a v6 then the weights are going to be different.

eekman
01-19-2008, 10:43 PM
Sadly it's only a V6 The weight will be different but the rest should be the same. Might be able to find the weight on a convertible here but not many on the road in the winter,The temp today is -42 with the windchill.
Thanks again.

ryan1994mustang
01-19-2008, 10:59 PM
ill go out there in the morning and write it down for you. its sleeting here right now so it would just make it a pain. im sure you wont be able to do much with the numbers until monday anyways. but you may be able to search online for the weight numbers somewhere.

eekman
01-20-2008, 12:01 AM
Thanks, my car is put away till Spring anyway but would like to have the paperwork finished.
Thanks again.

ryan1994mustang
01-20-2008, 02:39 PM
the sticker on my car looks something like this....
http://i4.photobucket.com/albums/y143/ryansurfdive/doorjamb.jpg

eekman
01-20-2008, 04:40 PM
Awesome. Exactly what I needed. Thank you very much Ryan.

ryan1994mustang
01-21-2008, 03:26 PM
not a problem