289-351w Carb, Intake & Ca

Tach9 · 11-03-2003, 04:40 PM

Hey All,

Cleaning out the garage and found some goodies that wsomeone may want:

Brand new in the box never installed Edelbrock intake manifold for 298-351w - $100.00 (Performer Series)

Edelbrock cam & lifters - new in the box never even taken out of the packing - $75.00 (performer series)

Holley 600cfm Double Pumper - brand new never installed never unpacked - $125.00

I bought these a long time ago for a project Mustang, but never got around to installing them...too many projects, and now I need some room so they gotta go.

Thanks,

Jay (imoRFT) · 11-04-2003, 02:54 PM

ship the whole lot to pa and i'll give ya 275 for everything........</P><edited><editID>Jay (imoRFT)</editID><editDate>37929.538287037</editDate></edited>

Tach9 · 11-04-2003, 05:36 PM

Jay,

Plus shipping and you have a deal...I accept pay pal..Let me know..sddress etc...

Thanks,

Aaron

Jay (imoRFT) · 11-04-2003, 06:05 PM

get me a shipping quote to 17925........ and i'll get my paypal stuff ready

Tach9 · 11-04-2003, 11:30 PM

Jay,

OK will do...

ThX's...

Aaron

nostang · 11-04-2003, 11:39 PM

the intakes don't swap between 351w's and other small blocks,fyi.

Tach9 · 11-04-2003, 11:52 PM

nostang,

Want to clarify that please? I was under the impression that windsor motors (289, 302 & 351w) use the same intakes. Now I know the 351w can also use the same cams but you must alter the firing order via the distributor wires..if I am wrong please elaborate. I'm not sure if Jay is planning on using the maniford et all on a 351w.

Thanks,

aaron

Jay (imoRFT) · 11-05-2003, 02:59 PM

everything but the carb would be going on a 289........</P>

nostang · 11-05-2003, 03:03 PM

the 351w intake will not fit on a 289.

vfast · 11-05-2003, 04:02 PM

I'd like to have the carb send me a pic to
chaz88@erols.com and I'll buy it cod