hi for all.....
this is my first time to poll in this gret forum and i say gret with the pepole usig it(: ok actuliy my english in writing is so broken i'm from SaudiAriba and yes we have street racing and drag racing and traucs but still we don't have that exberance in ubgrading the cars with HP so i need your helpe here mustang frinds...
i have a budgit of 13300$ for ubgrading my stang 06 iwhant this stang to rech the 600+ hp and it's ok to use chargers and i would like a twin turbo so can you helpe me by giving me a plan for what should i chang and what to install in engin and gear and what ever is nissaere and don't forget being in the safe side for the engine thanks alot....
Stage X Ported Heads, stage X cams w/kit, THrottle Body, New injectors, maybe pistons, Fuel pump, Then full exhaust with headers. then throw on any supercharger with arund 8 punds of boost and it shouldbe in that range i believe, or someone correct me[:@]
You can reach close to or at 600rwhp with those, but your stock motor internals are going to snap. I'd look for forged internals as well as the above stated. Also think about the tranny and rear end as those can take a **** on you at that power level.
Location: usally a state of confusion. But I live in jersey
Posts: 5,830
RE: what can i do with 13300$ to get 600+ rwhp
I agree. You'll have to beef up your engine to handle 600!. A built motor and twin turbos should get you600 easily. maybe with a little money to spare. Find a shop you trust to do the motor work.
__________________
I dont race on a DYNO!
Roll racing isn't real racing. It's just two retards speeding together!
what can i do with 13300$ to get 600+ rwhp
<--------- LOOK AT IT!!! 
