nassaubayman
12-11-2007, 04:24 PM
I picked up a nice console for my '67 Coupe at the Houston Autorama. It came with the shifter and a bracket. Before I get started installing it, I'd like to know a couple things:
1. Where does that bracket bolt to? I'm sure it bolts to the dash somewhere, but I'm not sure where.
2. Where will I find wiring for the lights in the console? Iassume the wire that connects to the current shifter will operate the console's gear position lights. There's light that comes on when the door is opened. Where will I find a plug for that?
3. My car has air. I've replaced the compressor, condensor, and lines (upgraded to a Sanden) but the thing still doesn't blow cold. In the spring I'm considering replacing everything with a VintageAir upgrade. Will the console be in the way?
Thanks
1. Where does that bracket bolt to? I'm sure it bolts to the dash somewhere, but I'm not sure where.
2. Where will I find wiring for the lights in the console? Iassume the wire that connects to the current shifter will operate the console's gear position lights. There's light that comes on when the door is opened. Where will I find a plug for that?
3. My car has air. I've replaced the compressor, condensor, and lines (upgraded to a Sanden) but the thing still doesn't blow cold. In the spring I'm considering replacing everything with a VintageAir upgrade. Will the console be in the way?
Thanks