Sway Away

Mustang Forums Mustang Classifieds Photo Gallery Calendars Search Live Chat Contact MF Sponsors
Mustang Recalls Mustang TSB's News Timeslips Timeline Wallpaper Member List Register Login

Sway Away

Printable Version

Mustang Forums >> Ford Mustang Tech >> 2005 - 2008 Mustangs >> 4.0L V6 Specific >> Handling Performance >> Sway Away

Page: [1]

Message

<< Older Topic Newer Topic >>

Sway Away - 12/5/2007 12:59:59 PM

Eddie64

Posts: 1
Joined: 12/5/2007
Status: offline

I recently purchased a front and rear sway bar off of a 08 GT What do I need to install these on my 07 V6,bushings diff bolts etc the package came with everything off the GT inc springs all for $27.00

Post #: 1

RE: Sway Away - 12/9/2007 9:33:03 PM

RedFire281

Posts: 156
Joined: 9/3/2006
Status: offline

Re-use the bolts for the front sway bars. For the rear you will need four (4) bolts, washers and nuts: 8 x 16 for the for the end mounts behind the shocks. You will need two (2) bolts, washers and nuts: 12 x 65 for the end links (these should be threaded at the ends only because the end link bushings ride on the smooth center of the bolt). If you bought these at a dealer it will cost you over $25. Go to a good hardware supply store and get GRADE 8 (don't go cheap because of the tensil strength needed and rust protection) - should cost under $10.

_____________________________

06 GT Redfire Manual; Saleen SC & Short Shifter; 39# Injectors; 98mm MAF; HT0 Plugs; Steeda LCA, Adj UCA, & Ultra-lite Springs; Raptor Shift Light; BMR Adj Panhard Bar, CHE K-member Brace w/Torque Limiter; Corsa Exhaust. Diablo tune by Adam@ST Motorsport

(in reply to Eddie64)

Post #: 2

RE: Sway Away - 12/10/2007 6:39:54 PM

mattthecat

Posts: 60
Joined: 10/11/2007
Status: offline

anyone know where i can find just the links for the rear sway bar. i have a gt take off but no links

thanks

< Message edited by mattthecat -- 12/10/2007 6:45:10 PM >

(in reply to RedFire281)

Post #: 3