#1
New Member
Join Date: Dec 2006
Location:
Posts: 93
351 w
if i wanted to change the motor out of a 87 bronco 351w could any 351 fit or maybe 5.0. im lost on it
__________________
Sponsored Links
This ad is not displayed to registered members.
Register your
free account today and become a member on Mustang Forums!
#2
4th Gear Member
Join Date: Mar 2006
Vehicle: 66 fastback
Location: Concord, NC
Posts: 1,244
RE: 351 w
for the most part any 351 or 302/5.0 will fit. the motor mounts are all the same. Most of the changes to these blocks were inside the block.
__________________
#3
New Member
Join Date: Dec 2006
Location:
Posts: 93
RE: 351 w
that with the tranny too
__________________
#4
4th Gear Member
Join Date: Mar 2006
Vehicle: 66 fastback
Location: Concord, NC
Posts: 1,244
RE: 351 w
all of the 351W and 302 blocks have the same tranny bolt pattern.
__________________
#5
New Member
Join Date: Dec 2006
Location:
Posts: 93
RE: 351 w
thanks alot i been surfing all night
__________________
#6
New Member
Join Date: Dec 2006
Location:
Posts: 93
RE: 351 w
im in roxboro nice to see a fellow carolina neighbor
__________________
#7
4th Gear Member
Join Date: Mar 2006
Vehicle: 66 fastback
Location: Concord, NC
Posts: 1,244
RE: 351 w
Its alway nice to see people some what close to you if you get in a jam. Their are a few of us Carolina boys here. Like salisbury and asheville
__________________
#8
New Member
Join Date: Dec 2006
Location:
Posts: 93
RE: 351 w
will do have a good one
__________________
#9
6th Gear Member
Join Date: Apr 2007
Location:
Posts: 5,646
RE: 351 w
The only difference is a few parts, the deck height on a 302 is 8.2" and it's 9.5" on a 351W. So a Windsor is taller and wider than a 302, but not by a whole lot.
__________________
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
351 w
