stroking my 5.0 questions (Full Version)

Mustang Forums >> Ford Mustang Tech >> 5.0 Mustang

stroking my 5.0 questions

  

zstangboi -> stroking my 5.0 questions (11/18/2007 4:25:49 PM)

buying a 5.0 to build up and swap into my 95 gt, its a 92 5.0, completely stock, i want to stroke it and then throw trick flows "head, cam, intake, roller rockers, chain and whatnot" kit on it and see what that does, unless anyone has a better suggestion

  
mjr46 -> RE: stroking my 5.0 questions (11/18/2007 4:32:31 PM)

go 331 or better yet 347 anything less would be uncivilized!!!!  you can do better than the trick flow kit ....try a Rhs head, afr and or a canfield and certain trick flow ones are okay too......as far as a cam if you want a OTS cam then comp makes some good ones...I'm partial to the XE series but there are other options out there for an intake rpm II is good or some trick flow ones are good to...a holley systemax is another good choice!!!!![:D]

defy -> RE: stroking my 5.0 questions (11/19/2007 12:25:42 PM)

what is all need to stroke to a 347

Stroked91 -> RE: stroking my 5.0 questions (11/19/2007 12:44:14 PM)

block work and a stroker kit

Mustangdemon67 -> RE: stroking my 5.0 questions (11/19/2007 1:19:26 PM)

is the car gona be your DD? i was going to stroke my 5.0 to 347 but i didnt because a non stroked motor will last longer. its my DD and the 302 is enough, i can take pretty much anything in my hood

Mustangkiler -> RE: stroking my 5.0 questions (11/19/2007 3:08:11 PM)

Id definitly look into the comp stroker cams.

defy -> RE: stroking my 5.0 questions (11/20/2007 1:52:20 AM)

ok what would be done to the block and how much would it all cost for the whole job ballpark figure

Jasperstang308 -> RE: stroking my 5.0 questions (11/20/2007 2:17:21 AM)

quote:

ORIGINAL: Mustangdemon67

is the car gona be your DD? i was going to stroke my 5.0 to 347 but i didnt because a non stroked motor will last longer. its my DD and the 302 is enough, i can take pretty much anything in my hood


explian please.........

  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.