That's right... The Fore Precision Fuel Hats are back in stock with SAME DAY SHIPPING!!
Pricing is as follows: $419.95 + Shipping
The top hat includes: # CNC Machined & Anodized Top Hat Assembly # All Gas Blocked wiring for the Pumps, Ground and Level Sender including the proper spade connectors to connect the wires to each fuel pump # Pre-cut and installed Gates 30R10 Submersible Fuel Hose for each pump # All XRP an Fittings # New Bolts for mounting the assembly to the fuel tank
You'll also have the choice of:
Single 8an Outlet (Built in Y Block) which includes an extra port for a return line
or
Dual 6an Outlets
-Accommodates Dual Ford GT fuel pumps as well as wiring for Single or Dual FPDM's (Fuel Pump Driver Module) -Direct replacement and bolts right in using an OEM gasket for a perfect seal as well as using the OEM fuel sending unit in the same stock location. -Eliminates the PPRV and offers a direct in-tank hose routing to both fuel pumps for optimum fuel delivery. -Two pairs of gas blocked 12 gauge conductors using 12ga Mil Spec fuel resistant wires for fuel pump wiring to the FPDM(s). This allows your Ford GT pumps to operate without losses from undersized OEM wires and will help in dropping duty cycle. Wiring for the ground and fuel level sender also included. -No welding or caulk used in assembly or manufacturing. Full billet components use o-rings, OEM seals, and gas blocked through conductors. -All assemblies are pressure tested prior to shipping.
Note: The Top hat assembly when purchased alone does not include: Fuel Pumps, Filters, Socks as well as the Fuel Level Sender or OEM Gasket. These are items which can be reused from your stock hat assembly or purchased seperately.
The Lethal Peformance/Fore Precision Works top hat can be purchased by itself or as a fully assembled fuel system along with pumps, lines, rails, Modifed FPDM or Dual FPDM with wiring harness.
< Message edited by Boostaddict -- 4/14/2008 12:50:44 PM >
Printable Version
Fore Precision Fuel Hats back in stock! Same day Shippi... - 
