Lowering springs

Mustang Forums Mustang Classifieds Photo Gallery Calendars Search Live Chat Contact MF Sponsors
Mustang Recalls Mustang TSB's News Timeslips Timeline Wallpaper Member List Register Login

Lowering springs

Printable Version

Mustang >> Vendors & Sponsors >> StangSuspension.com >> Lowering springs

Page: [1]

Message

<< Older Topic Newer Topic >>

Lowering springs - 11/15/2007 8:56:49 AM

5.0Edition

Posts: 53
Joined: 6/1/2007
Status: offline

Hey Josh, I have a 2003 GT and I was wondreing which setup will lower my stang more out of the two. The Eibach Pro-Kit or the H&R Sports. Also which are better and do I need CC plates for either two and will the HP Tokicos work fine with this two setups

_____________________________

2003 Mustang GT 5-spd

Post #: 1

RE: Lowering springs - 11/15/2007 2:55:52 PM

STANGSUSPENSION

Posts: 492
Joined: 5/2/2004
Status: offline

Basically they will lower the same amount. They have almost identical drop rates from the factory....

There is no better between the two... although the H&R does have a slightly stiffer spring rating.

Take a look at our spring rating chart http://www.stangsuspension.com/store/springratesarticle.asp you will see that the H&R has a slightly stiffer rating. They will provide a bit higher level of handling performance.

Sincerely,

_____________________________

Josh Sadowsky
http://www.stangsuspension.com
Mustang suspension parts and performance.

(in reply to 5.0Edition)

Post #: 2