RE: Newbie All but owns the name "Rustang" take a look
Login  | |
|
RE: Newbie All but owns the name "Rustang" ta... - 11/1/2007 1:53:24 PM
|
|
|
DanK69RustangVert
Posts: 163
Joined: 10/16/2007
Status: offline
|
Don't be thinking Mother raised a total idiot, I didn't spend over 20K on this thing. That's in the boxes and items setting around the car that I gathered so I would know I had them before starting on the stuff you can get all the time i.e. frame parts, doors etc.
It was the engine, Shelby stuff, and some of the mods I wanted acquired first. May seem a little backward but that was my plan. Believe me the car was not that expensive.
|
|
|
|
|
|
RE: Newbie All but owns the name "Rustang" ta... - 11/1/2007 3:33:57 PM
|
|
|
Batman67
Posts: 29
Joined: 4/25/2007
Status: offline
|
it'll buff out....
|
|
|
|
|
RE: Newbie All but owns the name "Rustang" ta... - 11/1/2007 4:40:13 PM
|
|
|
Kenny_Z
Posts: 160
Joined: 4/22/2007
Status: offline
|
First off, are all those Chargers in the background of that one pic?
Secondly, I thought I had the exclusive title of Rustang but I think you might of edged me out on that one. I've got the same attitude as you, classics should always be saved no matter the rust :D Good luck, I can't wait to see the progress...it'll give me hope for my Rustang.
_____________________________
..._____
o/_____\o
|O(_~_)O|
[|]-----[|]
|
|
|
|
|
RE: Newbie All but owns the name "Rustang" ta... - 11/1/2007 6:03:55 PM
|
|
|
DanK69RustangVert
Posts: 163
Joined: 10/16/2007
Status: offline
|
Yup Chargers! Those pics in the snow (The 20 footers) were taken by the guy I bought it from. They do mostly Mopar slap it and paint it jobs, then sell to "I wanna General Lee" types that haven't got a clue. There was no slap it and paint it on this Mustang without a lawsuit, (Youv'e seen the frame rails in the pics) and they didn't want to do the work it needed so it came to me cheap. The closer pics (Of the car in the shop, you know - the rust) I took. They had told how bad she was so I knew what I was getting.
|
|
|
|
|
RE: Newbie All but owns the name "Rustang" ta... - 11/2/2007 6:22:55 AM
|
|
|
tarafied1
Posts: 446
Joined: 12/10/2006
Status: offline
|
I've replaced just about everything on mine but the roof (which you don't even have), so I know they can be saved!!!
Good luck and keep us posted on the progress. I had the same additude as you on my car, if I hadn't saved it it would have been crushed. I figure the purists wouldn't be too upset that I saved and modified a standard 67 coupe that they made over 360,000 and it was rusted beyond most. Not counting my labor, I have about $30K invested and I know I can't sell it for that but I could have bought a new car for $30K not be able to sell it either and still not have as much fun with it. Besides half the fun is building it!
I'm glad to see another raised from the dead (or soon to be anyway).
Craig
_____________________________
67 Coupe, 429, C6, 9" 4 wheel disc brakes, Eleanor kit
http://www.myspace.com/tarafied1
http://www.cardomain.com/ride/2842869
|
|
|
|
|
|
|
RE: Newbie All but owns the name "Rustang" ta... - 11/2/2007 7:12:29 AM
|
|
|
DanK69RustangVert
Posts: 163
Joined: 10/16/2007
Status: offline
|
Thanks, Thats what the forum is about! I'll look 'em over.
I hadn't settled on any particular system for suspension yet, but had been looking at options. Up to now Heidt's MSII IFS had looked pretty good, but I knew there were others.
Thanks again,
Dan
< Message edited by DanK69RustangVert -- 11/2/2007 7:13:35 AM >
|
|
|
|
|
RE: Newbie All but owns the name "Rustang" ta... - 11/2/2007 7:22:10 AM
|
|
|
palerider
Posts: 532
Joined: 2/12/2006
Status: offline
|
I know what you mean about midwest cars - got 2 myself. If you nknow how to weld which I assume you do it's amazing what you can do with repo tin. Can get almost everyhting you need for 69 except cowl.
|
|
|
|
|
RE: Newbie All but owns the name "Rustang" ta... - 11/2/2007 7:38:39 AM
|
|
|
DanK69RustangVert
Posts: 163
Joined: 10/16/2007
Status: offline
|
quote:
ORIGINAL: tarafied1
I've replaced just about everything on mine but the roof (which you don't even have), so I know they can be saved!!!
Good luck and keep us posted on the progress. I had the same additude as you on my car, if I hadn't saved it it would have been crushed. I figure the purists wouldn't be too upset that I saved and modified a standard 67 coupe that they made over 360,000 and it was rusted beyond most. Not counting my labor, I have about $30K invested and I know I can't sell it for that but I could have bought a new car for $30K not be able to sell it either and still not have as much fun with it. Besides half the fun is building it!
I'm glad to see another raised from the dead (or soon to be anyway).
Craig
Exactly!  and tarafied - as I stated in your thread, I love that car man! And as for the roof well, I do have to replace the conv. top.
I figured I could buy a new car for the same money as I would spend on this when finished, but would not like the new car half as much. And when I'm finished with this mess - It will be a new car, that was the idea.
No car on the road today looks anywhere near as good as the '69 Shelbys (Save the new Mustangs) and the new Mustangs (IMHO) are not comfortable to drive, can't see out of the car from pass. side, door arm rest too low, console too low for arm rest, door too high to rest arm on, and what idiot in the gov. decided that we could not have a tilt wheel? Car makers need to design a way to tilt the wheel w/o changing the angle of the airbag to the driver! ???Double opposing joint with a pin that locks position when the charge goes off to release the bag??? It could be done, but an "Adjustable column" that drops maybe a 1/2" is NOT a TILT wheel! For someone as tall as I am (Not that tall at 6') I have to move the seat way back and drop the wheel down, then I am forced to stretch my arms out to reach the wheel with my shoulders almost pulled away from the seat to drive the mew Mustang - ergonomics my bu**! In that position the top of the wheel need to come toward me, BUT NOOoooo, the wheel won't T-I-L-T!
I'll design my ride for comfort, performance/mileage balance, handling, looks and FUN!
LIKE AN AMERICAN CAR SHOULD BE and do it for the same money as the junk cookie cutter cars most makers are throwing at the public and crying that we won't buy them!
Alright, my soap box just collapsed under my weight, I'll stop now. 
|
|
|
|
|
Printable Version
for $500.00! 
Until he had to have it inspected and it would not pass - GEE YA THINK!?! 
He's lucky he lived to sell it!
