Posts: 2254
Joined: 4/3/2004 From: Louisville, Ky Status: offline
whats a good x over setting and why
_____________________________
Don''''t be too proud of this technological terror you''''ve constructed. The ability to destroy a planet is insignificant next to the power of Big Oil.
Posts: 2254
Joined: 4/3/2004 From: Louisville, Ky Status: offline
two 10in Rockford fosgate HE 200 rms 400 peak. Bolt 350.1 mono amp. like 250 rms @ 4 ohms want deep bass sound =P
_____________________________
Don''''t be too proud of this technological terror you''''ve constructed. The ability to destroy a planet is insignificant next to the power of Big Oil.
for two 10" subs, i would start out with it set at 80hz. If you find you are missing frequency, try 100 or 120. However, if you go too high, it will get too noisy. If at 80hz, it sounds too noisy (which it shouldn't) turn it down a little to like 60-70. 80 should be ideal.
Printable Version
X over setting - 
