Just installed a 2.2L KenneBell and I am running 20 psi what kind of power do you think it is going to make on blower? Then I am adding a 100 wet shot to that and see how that goes
__________________
2003 Satin Silver Cobra with a 2.2L Kennebell at 20 psi and a 100 wet shot
the 2.2 is better than the new ones .. and you can actually hear it... I predict about 600-650 rwhp on blower - 750 or on spray.. that shot is going to be killer sc'd ... you might see 800 tq
running the 2.2 at 20 psi is maxing out ur supercharger, which creates very high intake temps, especially if u dont have any cooling mods, and spray on top of that?? i wouldn't expect ur pistons to last even a year on that set up?? do u atleast got a decent set of headers? what MAF r u running? what size injectors, what fuel pump? i forsee mr. detonation paying u a visit very shortly...... [:@]
No it is not 20 psi is not max on a 2.2 kennebell around 25 psi it will hold just fine and for the injectors I have 60lb and the fuel pumps I have ford gt supercar pumps with a boostapump and I am running the mafia there will be no problems with the motor I can promise u that!!!
__________________
2003 Satin Silver Cobra with a 2.2L Kennebell at 20 psi and a 100 wet shot
okay, but don't make me that promise too fast. and i guarantee u that u will never get 25 psi out of a 2.2 kb. maybe that is what u have read, but i doubt that u have the experience that i do. the 2.2 cannot boost 25 psi. Again, what cooling mods do u have?? Guarantee u the motor will not last long like that.
predictions:
cylinder #7 will loose compression from damaged piston caused by localized overheating or detonation in that cylinder
2.2L Kennebell
