I have a GT500 to stripe tomorrow and cannot find the stripe measurements online anywhere. Can anyone help me out on this. I need the width of the stripe and the gap between. I think it is 1 1/2", but I'm not sure and this one has to be right. Thanks!
I have a GT500 to stripe tomorrow and cannot find the stripe measurements online anywhere. Can anyone help me out on this. I need the width of the stripe and the gap between. I think it is 1 1/2", but I'm not sure and this one has to be right. Thanks!
There is a separate Shelby section in the forum so you might have better luck posting there - maybe someone will run to the garage and measure for you!
_____________________________
Auto, C&L, 89 tune by Lidio, 3.73, Tlok, J&M LCA; LPW cover; SS Superstripe, Roush scoop. Dual GT500 take offs. Black bullitts. Shaftmaster aluminum drive shaft.
I'm getting mine striped today. Fortunately my friend has one, so I tasked him to go out and measure for me. The bad news is that each section has his it's own size (leave it to Shelby). Here you go: Front facia: 9 7/16" Hood: 9 7/16" Roof: 11" Trunk: 10 3/4" My vinyl guy was pulling his hair out, so I just made it all 10 3/4".
Good luck
< Message edited by Mullens -- 2/14/2008 10:29:37 AM >
_____________________________
08 GT500, Black/Tungsten, Corsa A/B, JLT with Brenspeed custom tune
Printable Version
GT500 stripe measurements - 
