<<< PARTS REVIEW SECTION >>> (Full Version)

Mustang >> Ford Mustang Tech >> General Tech

<<< PARTS REVIEW SECTION >>>

mdvaldosta -> <<< PARTS REVIEW SECTION >>> (2/21/2005 2:33:09 PM)
RULES: ALL POSTS MADE IN THIS THREAD THAT ARE NOT A REVIEW WILL BE REMOVED. No comments or discussion here, just reviews. Please format your review like this: Car: 2002 Mustang GT Part: VT stage 1 n/a cams Pro's: great cams, nice idle, 25+ more hp, kept stock valve springs Con's: need a tune to take full advantage and keep from stalling on occasion Part: Nitto Drag radials Pro's: great street tire, hooks way better than stock, descent in the rain, lasts a long time for a drag radial - have 10k miles on mine right now! Con's: not as sticky as BFG's or Micky Thompsons Part: Ford Motorsport 4.10 Gears Pro's: awsome acceleration, especially 1st and 2nd gear, gas mileage barely changed, 5th gear is alot more usable now Con's: gas mileage does get alittle lower on the highway, 1st gear traction is tough with stock tires Part: Ford Motorsport 3.73 Gears Pro's: better than stock, but a waste in my opinion... better get 4.10's at least or you'll be disappointed Con's: not much better than stock, not worth changing to for most people. Part: Strange 10-way adjustable front struts Pro's: Awsome to be able to have a stock, drag, or road racing suspension with the twist of a dial, cheap - cost only $110 each from Jeg's. Got fox body struts since my car is lowered. Con's: none that I could find. Part: Steeda Sport springs Pro's: Lowered car about an inch, stiffer handling but was still comfortable Con's: not as low as I wanted it, swapped back out for fox body stock springs for better weight transfer at the track Part: Mac ProChamber offroad mid-pipe Pro's: noticable gain in performance, deep nice sounding mid-pipe Con's: not as loud as most offroad h or x pipes... and I really prefer loud! a pro for some folks. Part: Mac Longtubes Pro's: noticably louder, great seat of the pants power increase, fit great Con's: the coating on them suck, great price but they probably won't last but about 5 years before they need to be replaced. Part: Steeda Triax shifter Pro's: awsome feel, comfortable, 3rd gear is near impossible to miss, alot of confidence using this shifter, I've driven a Pro5.0 shifter in the same car and definately prefer the Triax Con's: Handle not quite as short as a Pro5.0, haven't tried the new MGW. no real cons to me. Part: Magnaflow cat-back Pro's: probably the best power producing cat-back on the market, nice deep growl, awsome stainless steel quality and a great fit. Con's: not much louder than stock... I'd rather give up a couple ponies and get something louder. Part: Ford Racing 70mm throttle body Pro's: Better than stock Con's: Not much better than stock, shoulda went with another brand - the Ford unit is actually more like 68mm... Part: Vortech SQ supercharger Pro's: unbeatable performance, as reliable as stock, best purchase I ever made Con's: expensive... but not when you compare what it would cost to make the horsepower that it does. Not much more power than stock up until you get over 3k rpms... then its a monster!

Aliate X -> RE: <<< PARTS REVIEW SECTION >>> (2/21/2005 9:47:52 PM)
Car: 93 5.0 LX Part: Borla Stainless Steel Catback for 5.0 Pros: Produces more power than most other catbacks, 1,000,000 mile warrentee, $80 intercooled tips, easy install, great quailty parts (clamps, flanges, welds), does not flood cockpit with noise nor does do you hear anything under the floors. Cons: Without full exhaust is not much louder than stock, expensive ($600+), if you dont adjust the system right and have it too close to your bumper, it will easily melt the bumper since all the heat is at the tips where it should be. Part: BBK Catted X-pipe Pros: 2 cats instead of 4, great quality construction, very easy install, passes emissions, very considerable difference in the sound. Cons: $100 more than a O/R mid pipe, aluminum. Part: BBK Ceramic Coated Shorty Headers Pros: Great difference in sound, very easy install, look awesome, contains heat well, does not discolor like chrome. Cons: Not the cheapest of all headers ($400) Part: BBK Adjustable Fuel Pressure Regulator Pros: Only $100, accepts a gauge, looks great, solved my problem of the car stalling out after header install. Cons: Decrease in gas milage, hard to get to the right pressure (if you are over like half a pound, the car will hesitate).

SilverGTV8 -> RE: <<< PARTS REVIEW SECTION >>> (2/22/2005 10:28:51 AM)
Car: 2003 Mustang GT Part: Magnaflow Magnapack Pro's: great fit, nice low deep idle tone, screams at WOT, SOTP gain, minimal interior drone Con's: Tips occasionally loosen up, well over the legal limit for dB Part: Magnaflow Catted X-pipe Pro's: great fit, enhanced catback tone Con's: Difficult to seal at the manifold Part: C&L upper intake plenum Pro's: great fit, nice clean appearence, super easy install Con's: Interior is pitted from casting need to be sanded out, exterior finish is bubbly Part: 75mm ACCUFAB Throttle Body Pro's: great fit, nice polished appearance, factory fit Con's: TPS can be difficult to set, attaching intake to TB can be difficult because of the size Part: Tunable Induction full Intake Pro's: Adds a new tone to the car, deepened exhaust system, screams above 3000rpm Con's: Poor fit, difficult to install fender filter alone but can be done Part: Diablo Sport Predator Pro's: great interface, allows data logging, timing, fuel, and speedo adjustments, good SOTP gains. Con's: Limited in ablities once power starts adding up Part: MGW Short throw shifter Pro's: great fit, quality is top notch, 1-2 is under 2inches with blue handle its close to 1.5 inches! , little interior noise. Con's: Takes some muscle to shift but better as it breaks in. Part: Ford Motorsport 4.10 Gears Pro's: great acceleration, especially 1st and 2nd gear, 5th gear is alot more usable now Con's: gas mileage does get alittle lower on the highway, 1st gear traction is tough with stock tires Part: Ford Motorsport Support Girdle Pro's: Fit and finish is top nocth, allows for draining and filling of Diff fluid without removing Con's: Clearance issues on lowered cars (gas lines and trunk) can be made to fit with some love taps[;)]

FoxGT -> RE: <<< PARTS REVIEW SECTION >>> (2/23/2005 8:38:50 AM)
Car: 1989 Mustang GT Part: Mac 1 5/8 unequal shorty headers Pro's: Not too expensive, Installation is easy if you have the right tools. Con's: It is hard to tighten the headers down due to the pipes being very close to the bolts. Coating sucks (these were not ceramic coated) Part: Mac O/R 2.5" H-pipe Pro's: Solid & Durable, I've bottomed out several times with only a few minor scrape & dents in the pipe. Great sound. Con's: Hangs low. It probably wouldn't be a good idea to put this on a lowered mustang. Part: Ford Motorsport X303 Camshaft Pro's: Fair idle, big torque & hp to 6200rpm. Used & still using OE valve springs Con's: None found yet.

primetime5.0 -> RE: <<< PARTS REVIEW SECTION >>> (2/24/2005 1:52:00 AM)
Car: 1988 Mustang GT Part: Pro 5.0 shifter Pro's: Much shorter shifts than stock, can hit third much easier than with a Steeda Tri-Axe Con's: Sucks to have to remove the center console to install the shifter Part: Flowmaster American Thunder Cat-back Pro's: Louder more aggressive tone that with the Delta 40's Con's: was hard to setup the spacing on the tailpipes and one pipe kept hitting the frame till i adjusted it correctly Part: Ford Motorsport "Super Sport Springs" Pro's: Lowered the car just the right amount about an inch, and didnt need CC plates to realign. Con's: dont have any Part: Kenny Brown Sub Frame Connectors Pro's: Car was much more solid after the install, rode a lot better Con's: They require Butt welding them to the frame which isnt as strong as the one that require welding up higher to secure them Part: Spec Stage 1 clutch Pro's: Very light pedal more so than the King Cobra I had Before Con's: 500 miles break in sucks! thats why I only did about 150 [:D] Part: Ford Motor Sport Ceramic Coated Shorties Pro's: The finish has still held up for over a couple of years, and I noticed a power increase over stock Con's: They are a little steep in prise a little over 300$ Part: 50resto t-5 rebuild kit Pro's: It got my tranny back to working order Con's: Didnt come with directions and it didnt come with the same amount of parts like the D&D kit. The price was more than the one D&D sells and theres comes with directions

Dbeck002 -> RE: <<< PARTS REVIEW SECTION >>> (3/29/2005 9:21:38 PM)
Car: 1991 Mustang LX Part: BBK Long tube headers and Offroad H-pipe Pro's: Great headers, made the car sound like a beast and the power increase was substantial. Con's: It was a little time consuming to install those headers but worth it in the end. Part: Autogage 5" tach w/shift light Pro's: Great tach for a great price, install was a sinch. Con's: None. Part: Mega-Bite Jr. lower control arms Pro's: Best control arm on the market, dual settings are available with it. Makes the car launch like a rocket. Con's: Kinda hard to install, requires a 100ft-lbs minimum impact socket gun (to loosen the stock bolts) which I did not have :) You'll need multiple jackstands and a really big hammer for these puppies. Part: Granatelli Double adjustable upper control arms Pro's: Made the rearend MUCH more responsive, then again they were installed with the mega-bites. The combination is outstanding though. Con's: None, install was rather easy. Part: Kirban Adjustable fuel pressure regulator and gauge Pro's: Fine tuning of the fuel pressure made easy. Con's: None. Part: Adjustable Pinion snubber Pro's: Very easy to install, takes 5 minutes and helps control the pinion angle. Con's: When mine is in race position it makes the ride a little bumpy. Part: GT40E Intake Manifold Pro's: Great manifold, a lot of power can be freed up with one of these. This manifold in particular can flow boost very well too. Con's: Since mine came off of an explorer, some of the EGR and sensor bungholes are not there. I don't care about EGR or the sensors but some people do, this can be problematic. Part: C&L 73mm MAF Pro's: Freed up lots of power, install was a breeze. Con's: C&L MAF's tend to be tempermental and don't like air turbulence. Part: BBK 70mm Throttle Body and EGR spacer Pro's: Freed up some more power. Con's: None. Part: Lakewood 50/50 Drag shocks Pro's: Helps with launching and weight transfer, very noticeable. Con's: Shocks still seem a little to stiff, maybe it's just me. Part: PTP 3.73:1 Rear Gears and Richmond master rearend rebuild kit Pro's: GEARS RULE! Con's: I didn't install them so I wouldn't know. Part: Summit brand harmonic balancer Pro's: Cheap and easy to install with the puller. Reduces vibrations by a whole lot. Con's: Starting to rust so I'm thinking of painting it. Can't re-use stock bolts if you have underdrive pulleys. You'll need to search for the right length bolts. Part: Prothane engine mounts Pro's: Great mounts, makes the torque transfer to the wheels much more responsive and reduces vibrations. Con's: Loosening the motor mount bolts was hard without the impact wrench. Part: Energy Suspension Transmission mount Pro's: Reduces vibration. Con's: To install requires some filing of the tranny crossmember. Part: MSD 6AL Ignition box Pro's: Helps gas mileage and idle. Con's: You don't feel this mod in the seat of your pants, it's one of those mods that does help all around though. Part: Autospecialties Underdrive pulley set Pro's: Easy to install and instant power gains. Con's: You might have a problem charging your battery if you have a big sound system with a stock alternator.

dan -> RE: <<< PARTS REVIEW SECTION >>> (4/14/2005 9:42:13 PM)
Car: 2002 Mustang GT Part: BBK Long Tube Headers Pro's: Noticeable gain in power. Sounds much more agressive than stock. Con's: Very hard to install. Can be expensive to have installed. Part: BBK Offroad H Pipe Pro's: Easy to install. Sounds very nice (combined with LT headers). Noticeable gain in power (combined with LT headers). Con's: May not pass emissions with no cats. Part: Magnaflow Magnapack Catback Exhaust Pro's: Easy installation, great sound, slight increase in horse power, nicer looking tailpipes. Con's: Not a good HP for Dollar mod, may be too loud if used with O/R pipe. Part: MGW Short Throw Shifter (Blue, sport, handle) Pro's: Fairly easy installation, MUCH shorter shifts, 2nd-3rd gear shift extremely easy, excelent build quality, quiter than other shifters, solid feel. Con's: More effort needed to shift (can also be a good thing). Part: "Ebay" Cold Air Intake Pro's: Cheap, noticeable increase in power, sounds a little better, looks good, easy to install. Con's: May not be built as good as name brand CAI's. Part: NX Wet Kit (100 shot) Pro's: Offers increadible gains of power. Safe. Fairly easy to install. Shaves 1.5 seconds off ET. Con's: Bottle refills can be costly. Bottle must be warm and filled enough. Can only use at WOT. Part: Diablosport Predator Tuner Pro's: Gives noticeable HP gains. Perminantly kill traction control. Disable rear o2 sensors (no need for MIL Eliminators). Recalibrate for gears or tire change. Remove rev limits/speed limits. Easy to use from drivers seat. Con's: Requires 93 octane for most tunes. Part: Nitto Nt555r Drag Radials (275/4) Pro's: Better traction than stock, wider. Last longer than other brands. Con's: Not as good of traction than other brands.

JonBeast -> RE: <<< PARTS REVIEW SECTION >>> (5/3/2005 12:15:20 AM)
Car: 1997 Mustang GT Convertible Part: Flowmaster catback Pros: good sound Cons: drone around 2100 rpm Part: BBK o/r h-pipe Pros: Great sound, good hp increase Cons: header bolts hard to reach when installing Part: FRPP 3.73s Pros: improved acceleration over stock 2.73s Cons: higher rpm on h-way Part: Motive Rear End Rebuild Kit Pros: Replaces rear end pieces to ensure a solid rear end when doing gear swap Cons: none Part: Intake Spacer Pros: cheap, easy to install Cons: not much of a hp increase Part: BBK 70mmTB Pros: Stiffer throttle, better response, easy bolt on Cons: none Part: C&L Plenum Pros: Better air flow, good hp gain, easy bolt on Cons: none Part: Steeda Timing Adjuster Pros: Easy adjustment, not expensive Cons: Have to use higher grade gasoline, not a big hp gain Part: Steeda Tri-Ax Pros: better shifts, more solid, much shorter shifts, better 2-3 shift Cons: makes some noise, notchy at first Part: King Cobra Clutch Pros: lighter than stock, grabs well Cons: none

rustyshackle4d -> RE: <<< PARTS REVIEW SECTION >>> (12/4/2005 6:19:50 AM)
1997 Mustang GT Part: Cervini's Ram Air Hood & Kit Pros: Looks good, fits very well, and very noticable seat of pants hp gain. Cons: ... price, and you must keep the stock airbox to make it work.

83beast -> RE: <<< PARTS REVIEW SECTION >>> (12/8/2005 11:25:32 AM)
Car: 1983 Mustang GT w/ 1985 Mustang 5.0 HO Part: Hurst Competition Plus Shifter Pros: Perfect fit and finish; Amazing deal for the kit: 174.99 for the shifter, chrome handle, white que-ball knob, shifter sealer boot, new bolts, new console plate with Hurst logo (Jegs.com); Perfect shifts, every time, never miss 3rd; plus, its made by Hurst, the legendary name in shifters. Cons: The arm doesnt curve quite enough towards the driver. Part: Dynomax 2.5" Cat-Back Exhaust Pros: Very nice fit; Sounds mean, not too aggressive at idle, but they howl at WOT; Sounds like a big block when you are behind the car and its accelerating away. Cons: None. Part: Auburn 7.5" Differential, Posi-Traction Pros: Very nice diff, handles all the power i have now much better than the stock piece; Fit perfect; Good upgrade for someone who has more power than stock; I know, i blew my stock diff, and this one has the capabilities I need. Cons: None. Part: Cooper Cobra Radial GT Tires Pros: Very reasonably priced tires: 235/60 R15=$55; Last a very long time, and have amazing smoking abilities; Dont leave much rubber when just peeling out, but will melt pavement when doing a brakestand; Good traction in the rain; Nice cobra snake emblem on the black side, and very nice "Cooper Cobra Radial GT" raised white lettering on the opposite side. Cons: None. Part: Sylvania Silver Star Headlights Pros: Brightest non-HID lights on the market; Perfect fit; Make night driving much easier. Cons: None. Part: Suspension Techniques Lowering Springs Pros: Nice looking springs; Function great, lower the car only about 3/4-1", but enough to make it handle much better than stock; the car's stance looks more aggressive, yet not too much to let people know what it can do; plus, no need to change the rack bushings to offset ones; Good price-169.99 (Jegs.com). Cons: None.

88BlueGT -> RE: <<< PARTS REVIEW SECTION >>> (1/10/2006 3:50:08 PM)
Car: 1988 Ford Mustang GT 5.0 (Automatic) Part: MAC Long Tube Headers (1 5/8 pri., 2 1/2 col.) Pros: Sounded great, not too expensive Cons: Very difficult install (almost impossible to remove them w/ the motor in the car), coating didnt last too long, rusted out very quickly. They were also ceramic coated. Part: MAC 2 1/2 Pro-Chamber H Pipe Pros: Sounded excellent (along with LT's), easy to install, cheap price, can take abuse (bottomed out a few times and still no dents and barely some scratches. Cons: Hang low compared to other exhausts, do not recommend if car is significantly lowered. Part: BBK 70mm Throttle Body Pros: Quick bolt on, decent power gain, looks good. Cons: None that I can know of. Part: Flowmaster American Thunder Cat Back Pros: Sounded excellent (didnt install them so I do not know how the install was) Cons: Nothing that I know of. Part: Edelbrock Performer RPM Intake Manifold Pros: Easy Installation, significant power gain, great looks. Cons: Nothing that I know of. Part: Mr.Gasket Steel Powdercoated Power Pulleys Pros: Easy Install, easy power gain. Cons: Almost just as expensive as aluminum ($95), nothing fansy, mininal power gain for pulleys.

Black Snake -> RE: <<< PARTS REVIEW SECTION >>> (1/10/2006 4:24:12 PM)
Car: 1987 Ford Mustang GT Vert Part: MAC Shortie Headers Pros: Easy install took less than 1 hour. Cons. Mac products not good quality, head warped header flange Part: UPR Off Road X-Pipe Pros: Bolted right up to Mac headers, took less than 15 mins to install. Noticable HP gain. Cons: Sound is not as loud as H-Pipe Part: BBK 70mm Throttle Body Pros: Quick bolt on, goes well with intake Cons: Some wistle noise but not big deal Part: Magna Flow High flow Exaust Pros: Looks great on car, Nice quite idle Cons: Too quite, has to do with the x-pipe Part: Edelbrock Performer RPM Intake Manifold Pros: Easy install, Noticable power gains. Easy to maintain Cons: Expensive, spacer needed for taller valve covers. Part: Edelbrock Performer Heads Pros: Very easy install, performs very well, high flow intake and exaust. Cons: Comes in 3/8 stud hard to find 1.7 Roller rockers Part: Msd Ignition Dizzy, coil, and 6AL Box. Pros: Very easy install, noticable throttle response, better Gas milage, better spark. Cons: finding a place to put it. Part: BBK Cold air Intake Pros: Nice upgrade, makes engine look better, better intake flow. Cons: Some modification required to install properly Part: Hurst Short throw Shifter Pros: Easy install, helps with shifting, easy shifting, looks great, performs well. Cons. Sits kind of high, doesnt allow cover to close fully. Part: Nitto 555zr/35/18 18" Cobra R rim Pros: Looks awsome, tires stick very well, handles very well, fills wheel well Cons: Had issues with center cap clearing dust cap, wheel is heavy. Part: Ford Racing 3.73 Gears Pros: Easy install, best upgrade ever, Noticable Difference Cons: Gas Milage suffers Part: Summit Racing 1.7 Roller Rockers Pros: More lift, better perfomance Cons: Took a while for me to adjust them (My lack of knowlege), instructions not included. Part: Cervinis Ram air hood Pros: Looks freaking awsome, sets the car apart from the rest, cools engine, saves weight, little HP gain. Cons: None Part: aVs Headlight and Tail light covers Pros: Snap on install, makes car apart from rest Cons: Not legal, always getting pulled over. Part: Mass Air Conversion from Summit. Pros: Easy install, easy to follow instructions Cons: Patients Part: C&L 76mm Maf Pros: Looks good, good upgrade to have, Minimal HP Gain. Cons: None Part: Ford racing 24lb injectors Pros: Easy install, good upgrade to have, Hp gain Cons: None Part: BBK Fuel Regulator and Gauge Pros: Easyiest install to do, nessesarry to tune car,easy to read gauge, looks good. Cons: Little snug to get last bolt Part: AutoMeter 5" Monster Tach and Shift light. Pros: Very accurate, easy to follow instructions Cons: Kinda big, and expensive Part: Sony Xplod Blacked out CD PLayer and 10 Disc CD changer Pros: Excellent sound, looks great, easy install, easy to work cd changer Cons: None Part: 50 Resto - Headlights, Cobra, Floor mat, black Carpet Pros: Exact fit, looks great, easy install. Cons: none

justingt -> RE: <<< PARTS REVIEW SECTION >>> (3/12/2006 5:56:34 PM)
Car: 2001 Performance Red Musatng GT (In chronological order) Gloss black rear fascia letter inserts Pros: the price (5 bucks shipped!) and they really tied together the rear bumper cover, durable Cons: none C&L engine bay CAI / tru flow 80 mm maf. Pros: Woke up the engine a bit Cons: paying for install that turned out to be **ty! [:'(] MAF probably did jack ...but she'll see a blower when the time is right[:)] American Automotive Carpet Tri-Color Running Pony Floor Mats. Pros: not gonna even get into the install lol...gave the interior a much needed accent Cons: the price! (good thing it was for xmas! lol) I have to clean my shoes off before I go in my car lol FRPP Bullit Race Pedals. Pros: sweet holiday deals! looked sweet with the floor mats! Cons: General difficult install (Dead Pedal: stock wouldn't come out! new one didnt want to go in!; Brake Pedal: had to boil to get it on and even then it was difficult to install; Accelerator Pedal: had to take out entire pedal assembly and getting the pin that holds the pedal on out and putting it back) Magnaflow Magnapack Cat-Back Exhaust System. Pros: absolutely amazing tone!!! absolutely perfect sound! not too loud and not too quiet! Cons: HAH yeah right! Sylvania Silverstar Headlamp Bulbs. Pros: Easy install and a nice improvement over stock Cons: some people think my high beams are on Mach 1 Chin Spoiler. Pros: really brings a bland front end together...one hell of an aggressive look....worth the install Cons: ty hardware (decided to use 1/4 inch 20 thread screws with nylon threaded nuts...this bitch aint comin out!!) one horrible bitch of an install Denso Iridium Spark Plugs. Pros: no need to gap [:)]. install wasn't as hard as I feared it would be [8D]. started up smoother and just ran a litte smoother and felt cleaner. Cons: install isn't hard but sure is time consuming for a 16 year old such as myself. anti-seize took days to get off my hands. being so nervous the car wouldn't start! EDIT: then the one in cylinder three ejected itself...requiring a new head and coil[:@] to the tune of 2 grand yikes! never again Mach 1 Grill delete (2 Peice). Pros: Incredibly aggresive look added to the front....completes my front end mods Cons: Almost painful to install! Had to "carefully bend the fender peice attached to the grill forward to unbolt the stock grill!!! 4 count em 4 METAL botls holding the ing stock grill on there! Not having screws to hold the pony on there from the stock grill peice. However if this does happen you can use two of the four metal bolts that held the old grill on as bolts to hold the pony on. 50% Headlight and Tailight and Sidemarker and Foglight tint. Pros: Pretty easy install...squeegeing the water out and getting to lie flat is a little frustrating but pretty easy...looked absolutely amazing! Cons: Pissed my Dad off so I had to take them off after 2 days!! [:@] Never got to use the sidemarker and fog light tint! FRPP 17x8 Anthracite Bullit Wheels. Pros: No more ty base model wheels. Looks awesome. Has a nice subtle, stock but mean look to it. Completely changed the look of the car for the better![:D] Cons: Old wheels had a center cap so I have to buy chrome lug nuts...no fault of the new wheels tho! SCT Xcal II flash tuner. Pros: Even with the 87 octane tune it did wonders for the car! Made the exhaust sound meaner. Nicer idle. Smoother right. Tighert throttle w/ better response. Incredible acceleration! Tightened up the tranny! Cons: The new first gear shift point takes a little getting used to....but it's so in worth it! UPR Bullit lock Soldiers, A/C Knobs, Hadelight Knob Pros: Everything looks great! The interior really has some styling to it now. All around easy install as well. Cons: Old headlight knob is a bitch to get off. Had to use a hack saw to cut it off! The new one goes on easily tho.This stuff can be a bit pricey but hey everything costs money right? Professional Products 75mm Throttle Body and Plenum combo Pros: Meaner exhaust tone. Bit of a jump in power. Nice engine bay bling as well since I went with the polished version. Cons: Expected more from it. Oh well. It was still worth it in my opinion. FRPP Dual A-Pillar Gauge Pod w/Oil Pressure and Water Temp. Gauges Pros: Looks bad ass. Fun to drive with. Far more accurate then the stock dashboard gauges. Illuminate at night. Cons: Installation costs were a tad high but I still say it was worth it Ebay White Face Instrument Cluster Gauges Pros: LOTS Cheap: $24.00 shipped; Easy to install: 45 minutes including time to gether tools and such; Looks: SICK! and they match the a-pillar gauges now too! Cons: none to speak of! Goodyear Eagles 245/45/17 (died now) Pros: Good dry performance, not spectacular, but good. Cons: Sucked balls in any form of even minor inclement weather. Didnt last long. BF Goodrich KDWS 245/45/17 (installed 3/1/08)** Pros: Better traction in both dry and wet weather Cons: none yet

NORTON98 -> RE: <<< PARTS REVIEW SECTION >>> (7/29/2006 1:56:16 PM)
SLP Loudmouth II Pro:Nice and loud but deeper and more refined than LMIs, Great looking tips, Stainless Steel, Increase in HP Con:Drones like crazy at 2000 RPM, some passengers dont like the loudness SLP Catted X Pro: Good sound for a X, Hp gain, Stainless Steel, Passes somg check Con:H pipe might Sound Better

dlazrael -> RE: <<< PARTS REVIEW SECTION >>> (1/21/2007 10:04:18 PM)
Steeda Tri-Ax shifter Pros: Good, smooth short shifts. Never miss 3rd! Easy 20min install! Cons: More noisy than stock, only 2 adjustible posistions for the shifter handle. Steeda Racewing Pro: Good look, easy install. Con: Comes with plastic wingtips, billet aluminum wingtips costs $90 on top FRPP "C" Springs Pros: Drops car about an 1". Easy install. Near stock spring rates (for Mach 1) Great cornering. Cons: Ride gets a little harsher, but not much Mac O/R Prochamber Pros: Good gains when coupled with catback. Sound is really deep, like a true musclecar. Cons: PITA install on pass side header to midpipe bolts. Steeda Cat-back Pros: No drone, deep sound. Cons: None (for me) FRPP 17x8 Black Bullitts Pros: Looks great Cons: Shoulda got DD for the rear Diablosport Tuner Pros: good gains, adj alot of stuff on the ECU, clear troublecodes, change idle speed, timing, gear ratios, tire/rim sizes, turn off trac control and rear o2 sensors. Cons: Limited, most Dyno's tune with SCT, so the Diablosport is wasted.

ColdCityMustang -> <<< PARTS REVIEW SECTION >>> (4/15/2007 5:27:52 PM)
Car: 1995 Mustang GTS 5.0 HO (5spd) Part: Amsoil Synthetic Lubricants Pros: Better oil pressure, smoother and easier shifting, better gas mileage, rolls easier when our of gear Cons: Little expensive(totally worth it tho) Part: BBK 75mm Throttle Body Pros: Small HP gain, looks awesome, greater intake potential Cons: Thin walls made it tough to tap for nitrous Part: NOS Mustang Dry kit Pros: She moves, huge power gain, fun to show kids that dont know what it is Cons: Nitrous is expensive for how little you get out of it, have to be carefull when running the lines-don't want to be getting high while driving Part: MSD Blaster coil Pros: Immediate results! Ran way smoother Cons: Glue melts and it starts to wobble around Part: Ford Racing 9mm plug wires Pros: Helps get that spark to the engine Cons: Non Part: Eibach Suspension Pros: Helps cornering when wet out, rides lower Cons: Car rides like I have steel bars for shocks... Part: Cevinis Bumpers and Side skirts Pros: Fit perfect! Look amazing Cons: Way to expensive Part: MSD Cap and Rotor Pros: Looks sweet, seems to be making a difference in how the car runs Cons: non Part: Flow-Tech Headers Pros: Not to expensive, sound great, small HP gain Cons: Non Part: Flow-Tech off road H-pipe(no cats) Pros: Sounds awesome! Cons: Exhaust smells like poo Part: Flow Master 50-series mufflers Pros: Sounds wicked when you get on it, but not loud enough for cops to care when you're just cruising Cons: Non Part: BBKadjustable fuel regualtor Pros: Looks awesome, easy to tune Cons: Non Part: APC Cold air intake Pros: much more air, deffinate power gain Cons: Finish fades quicker than I would have liked Part: BBK Underdrive pulleys Pros: Doesnt effect power steering, tension or charge. Small power gain Cons: non Part: Summit Racing Battery Relocation Kit Pros: cheap and it came with everthing I needed Cons: lol having to jump start my car from the trunk Part: Cobra R Wheels Pros: look sweet Cons: chrome fades in spots in about a year Part: Auto Meter Lunar Series Gauges Pros: awesome looking with our stock green gauge color scheme Cons: expensive Part: BBK 255 lph Fuel pump Pros: Non at the moment Cons: Doesn't seem to be doing much, whines Modification: Shaved door handles w/ poppers Pros: Awesome looking! People are in awe when they see it Cons: Forgetting the popper remote in the car.....

GTfan03 -> RE: <<< PARTS REVIEW SECTION >>> (6/28/2007 5:42:57 AM)
Car: 2003 Mustang GT 4.6 (5spd vert) Part- Flowmaster American Thunder Exhaust. Pros- Fairly easy install. Gives the car that Mustang sound. Cons- None. I love this exhaust Part- BBK Cold Air Intake Pros- Fairly simple install. Gives the car a nice growl on initial take-off Cons-Installing the cone in the fender well can be a little tricky by yourself. Part-Bassani X-pipe with hi flow cats Pros-Rounds out that great Mustang sound, and sounds great with the American Thunder Exhaust and cold air intake. Car really growls at 4k RPM, and has a nice rumble at idle now. Cons-The right side header nut can be a pain in the rear without a semi-deep socket on a swivel. I learned the hard way about that. That was the only hang up on installing this part.

5.0fuz -> RE: <<< PARTS REVIEW SECTION >>> (8/31/2007 8:13:57 AM)
CAR: 1990 MUSTANG GT 5.0 (5 speed) Part: BBK Longtube headers pros: Nice add to the top end when mixed with the 4.10 gears cons: fitment was a little tough, pitting within short period of time Part: BBK x pipe pros: Good quality, 2 cats, easy install, nice sound cons: Little pricey Part: Flowmaster 40 series pros: Awesome sound @ drive and idle cons: I have them already and want the super 40's Part: Smoke Taillights pros: look pretty badss cons: Can't see *it during the day and they're very dim at night Part: Powermaster Performance starter (part number PM9603) pros: Extremely awesome 90 ft. lb. more torque than oe. on board solonoid, easy hook up, adjustable mounting bracket to clear header and block heat, smaller than stock cons: $100 more than stock reman, but WELL WORTH the money

jEEd -> RE: <<< PARTS REVIEW SECTION >>> (10/8/2007 11:05:32 PM)
Car: 1996 Mustang GT Part: Flowmaster 40's CB Pro's: gives you that classic mustang sound, nice and deep Con's: not very loud compared to the stock, just "noticeable" difference. Part: JLT Ram Air Intake Pro's: works alot better than the stock and keeps the air alot cooler with the 4" piping. Con's: comes with such a crappy heatshield that heatwrap / cai adator is necessary if you dont want to suck in hot air. Part: Eibach Pro Kit (Convertible) Pro's: definitely stiffer, relatively no "nose dive" when braking, drops the car roughly 1.2-1.5" Con's: didn't lower the car that much compared to many other brands that claim 1.5" drop, removing isolators up front is almost necessary to make eibach's look good. Part: Full PI Swap (H/C/I) Windsor Pro's: Definitely one of the best bang for your bucks on the underpowered SN95's. definitely 50 or so hp difference and tq is very noticeable. Con's: compression is bumped to 10.5:1 therefore can't run higher than 8psi of boost "safely". Part: Accufab 75mm Mirror Finished Throttle Body & Plenum Pro's: definitely show worthy, way better throttle response compared to stock and will yield greater #'s with boost. Con's: expensive for price compared to other brands that almost put out the same hp/tq. Part: Magnaflow Catted Tru-X X-Pipe Pro's: noticable gain in performance, alot louder than stock, but a bit more raspy than deep. Con's: not the deep sound that some people look for and also expensive for name brand. another bad thign was the bracket to hang on the middle of the midpipe was off by about 6"s so its hanging right now...

Blackened04 -> RE: <<< PARTS REVIEW SECTION >>> (1/10/2008 2:53:20 PM)
Car: 2004 Mustang GT Part: MGW Short-throw Shifter Pros: Very solid construction. Road noise is nonexistent and shifts are unbelievabley short, even with the orange shift handle. Cons: None other than the MGW inner dust boot was a bitch to put on, and left my knuckles torn up.

Page: [1] 2 next > >>

Return to Mustang Forums home page or view the Full Version of this page.