Tach?
Login  | |
|
|
|
|
|
RE: Tach? - 9/24/2007 4:37:32 PM
|
|
|
my77stang
Posts: 6878
Joined: 12/19/2006
From: Citrus County, FL
Status: offline
|
he's right, there is a module that plugs into the back of the tach so you can use it with the V8.
I have it in my car, but i hooked up a sunpro tach anyways because i needed higher than the stock tach offered.
held on the steering column with a hose clamp i sprayed flat black..... its about the right size and i believe it fits in alot better than one of those stupid jumbo units everyone slaps on the dash. that little one hanging down is oil pressure, and i use the stock gauges for water, battery, etc
|
|
|
|
|
RE: Tach? - 9/24/2007 5:05:17 PM
|
|
|
geddylee
Posts: 160
Joined: 4/19/2007
Status: offline
|
Thanks man, also could i fit a tach in the dash or is there anyway to do that?
_____________________________
76 CobraII-85 5.0HO Swap
'86 Honda Spree
http://www.cardomain.com/ride/2842446
Metalcore is love.
|
|
|
|
|
RE: Tach? - 9/24/2007 6:13:23 PM
|
|
|
my77stang
Posts: 6878
Joined: 12/19/2006
From: Citrus County, FL
Status: offline
|
you'd have to hack the instrument clutser, but the rest of the gauges probably wouldnt work after that 
btw for some reason the pic didnt work, so here it is again.....
|
|
|
|
|
RE: Tach? - 11/10/2007 2:10:19 PM
|
|
|
geddylee
Posts: 160
Joined: 4/19/2007
Status: offline
|
77Stang,
I took that tach out and there was no pill, so I assume that it was wrong with V-6 then? So it should be right with the V-8 assuming i can get the plug to stay in. One of the clips holding the plug in is gone so the tach was loose and not working, the other clip is not far from it either. I'm going to try put some electic tape on it to see if it will stay in. If it still doesn't work i guess i'll have to get an aftermarket tach.
_____________________________
76 CobraII-85 5.0HO Swap
'86 Honda Spree
http://www.cardomain.com/ride/2842446
Metalcore is love.
|
|
|
|
|
Printable Version
